1963 RUESCH 146 RING TYPE SLITTING LINE SLITTING LINES | Machinery International Corp
Overview
Type:
SLITTING LINES
Manufacturer:
RUESCH
Model:
146 RING TYPE SLITTING LINE
Condition:
Used - Good
Year:
1963
Stock #:
12672
Status:
For Sale
Description

24" (609mm) RUESCH MODEL 146 RING SLITTING LINE (12672)

Specifications
Capacity24"

MACHINE# 12672 MANUFACTURER: RUESCH MACHINE CO. TYPE SLITTER: PULL THRU RING SLITTER MODEL: 146 SERIAL No.: N2094B 5407 ARBOR SIZE: 27" (685mm) x 4 1/8" (105mm) MATERIAL SPECIFICATIONS: TYPE: STEEL, STAINLESS STEEL AND COPPER ALLOYS STOCK WIDTH: MAXIMUM 25" (635mm) COIL O.D.: MAXIMUM 48" (1220mm) COIL I.D.: MAXIMUM 20" (508mm) REWOUND I.D. OF COIL: 16" (406mm) COIL WEIGHT: 6,000 LBS. (2720 KG) STOCK THICKNESS - MAXIMUM: AS PER CATALOG: .125" (3.175mm) AS PER ORIGINAL ORDER: . 080" (2.0mm) AS USED - MAXIMUM: .093" (2.36mm) AS USED - MINIMUM: .015" (0.3mm) DIRECTION OF TRAVEL: LEFT TO RIGHT LINE SPEED ON TWO SPEED MOTOR: AT 900 RPM: 112/337 FPM (34/102m/min.) AT 1800 RPM: 225/675 FPM (68/205m/min.) PAYOFF/UNCOILER: MANDREL EXPANSION: 15 1/2"/18" (393.7/457.2mm) HYDRAULIC EXPANSION MANDREL WIDTH: 28" (711.2mm) NON-DRIVEN BACK TENSION: AIR CLUTCH MANUFACTURER: WITCHITA AIR CLUTCH SERIAL No.: 22131 B 224 LINK BELT GEARBOX: ROLLER BEARING AIR CONTROLS: NUMATICS WORLDWIDE COOLING SYSTEM: CHAMPION SIZE 1-3/4FC SERIAL No.: 11214 SLITTER HEAD: SINGLE ENTRY BILLY ROLL: 3 1/4" (82mm) DIA. x 27" (685mm) ENTRY STRIP HOLDDOWN: MANUAL VERTICAL ADJUSTMENT ARBOR SIZE: 4 1/8" (105mm) x 27" (685mm) FACE WIDTH SLITTER HEAD ADJUSTMENT: HANDWHEEL ON BOTH SIDES THREADING MOTOR: 3 HP, 208-220/440 VOLT, 1760 RPM, 9/4.5 AMPS, LOUIS ALLIS W/GEAR RATIO 100 TO 1 SPACER O.D.: 6 1/8" (155mm) KNIFE O.D.: 7" (178mm) MAXIMUM, 6" (152mm) MINIMUM RING: 7 1/4" (184mm) O.D. x 6 1/4" (159mm) I.D. SCRAP WINDER: MAXIMUM TRAVERSE: 8" (203mm) COIL I.D.: 16" (406mm) MAXIMUM COIL O.D.: 24" (610mm) DRIVE MOTOR: 5/2.5 HP, 460 VOLT, 1740/870 RPM, 9.2 AMPS, 3 PHASE/60 HZ, LOUIS ALLIS GEARBOX: LOUIS ALLIS S/N 1W-30540, INPUT RPM 1750, OUTPUT RPM 155, RATIO 11.4 TO 1 RECOILER: MANUFACTURER: H.J. RUESCH MACHINE CO. TYPE: EXPANDING MANDREL MANDREL SIZE: 15/16" (380/406mm) I.D. x 28" (711mm) FACE WIDTH TYPE OF EXPANSION: HYDRAULIC COIL PUSHOFF: HYDRAULIC SEPARATOR PLATES DRIVE MOTOR: 50/25 HP, 1775/890 RPM, 64/43 AMPS, 3PH., 60 HZ, TYPE C0GMX, S/N 3274629001 W/SLIP CLUTCH FOR ACCELERATION CONTROL AND TIMING BELT DRIVE AIR BRAKE FOR BACK TENSION: LOUIS ALLIS MAGNETIC MODEL 1-042-031-1, TORQUE 230 FT. - LBS., 440 VOLT, 3 PH., S/N B-386-463 RECOILER TURNSTILE: No. OF ARMS: 2 ARM SIZE: 7 1/2" (190mm) DIA. x 39" (990mm) FACE MANUAL SWIVEL HYDRAULIC UNIT: DRIVE: 7 1/2 HP, 1160 RPM, 9.2 AMPS, 3 PH., 60 HZ OIL TEMPERATURE GAUGE OIL RESERVOIR: 13" (330mm) x 36" (914mm) x 22" (558mm) HIGH LARGE QUANTITY OF TOOLING SPARE MANDREL FOR RECOILER **PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE** **ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

24" (609mm) RUESCH MODEL 146 RING SLITTING LINE (12672)

24" (609mm) RUESCH MODEL 146 RING SLITTING LINE (12672)
SLITTING LINES