48" X 7.5" TERMINAL EQUIPMENT SLITTING LINE (13942)

(Used) 48" x 7.5" Terminal Equipment Slitting Line (13942)

MACHINE 13942

Coil Weight: 50,000 lbs.
Coil Width: 48" (50" Untrimmed)
Coil I.D. Entry: 20" - 24"
Coil I.D. Exit: 20" - Pads for 24"
Coil O.D.: 72"
Line Direction: Right to Left

Line was Rebuilt in 1999/2000 by L & M Equipment

Consisting of the following:

-Entry Coil Car:
54" Wide Bed
Self-Contained Hydraulics
8" Bore Hydraulic Lift Cylinder
Hydraulic Lift
Hydraulic Motor Travel
Hand Pendant Control
Cable Reel
14" from Floor to bottom of "V" Cradle
Overall Size: 83" L x 54" W x 58" High

-Mandrel Uncoiler:
S/N: 12090-29
Hydraulic Expansion, 19" - 25"
Bolt on Pads for 24.5" - 30.5" Expansion
52" Face Mandrel
Slide Base
Powered Overarm Holddown Roll
AC Motor Threading Drive w/Air Clutch
Water Cooled Brake
Passline: 52" from Floor to center of Mandrel
Overall Size: 144" L x 84" W x 99" High

-Peeler/Coil Breaker Unit:
Peeler Table w/36" wide Blade
3 Roll Coil Breaker, 7" Dia. x 58" Face Rolls (1 over 2)
Top Roll adjusted by hydraulic motor driven Jackscrews
Bottom Rolls Driven by Hydraulic Motor
Passline Height: 59"
Overall Size: 103" L x 102" W x 97" High

-Pinch Rolls/Crop Shear:
6" Dia. x 55" Face Pinch Rolls (Non Driven)
Hydraulic Cylinder Loaded
Roller Type Crop Shear
50" x 0.375" Capacity
Hydraulic Cylinder Actuated
Overall Size: 160" L x 27" W x 81" High

-Removable Head Slitter (2 Heads):
Entry Threading Table
Entry Driven Pinch Rolls, 6" Dia. x 55.5" Face Rolls
Entry Roller Side Guides - Hyd. Motor Adjustment
7.5" Dia. x 52" Face Arbors
Over the Arbor design.
Outboard will travel in to 38" for heavier gauges
30 HP, 1750 RPM, Foote Jones Helical Gearmotor, w/57.7:1 ratio
30 HP, 1760 RPM, Pacemaker Motor, 230/460 V (Inline with Foot Jones motor)
Passline Height: 50"
Overall Size: 188" L x 84" W x 63" High (88" High with Head)

-Recoiler:
S/N: 38824 (rebuilt in 2000)
Hydraulic Pushoff
20" Dia. x 54" Face Drum
Bolt on Pads for 24" Dia.
Hydraulic Grip - Expand
2 Speed Reducer
125 HP DC Motor, 650/1950 RPM, 500 V, w/Blower
ABB DCS 800 Drive
Overarm Separator
72" O.D. Capacity
Passline: 54" from Floor to center of Drum
Overall Size: 178" L x 129" W x 94" High

-2 Arm Turnstile:
C-Hook Type Arms w/6" Wide x 8" High Slot
Approx. 57" useable Arm Length
Powered Rotation
Hydraulic Pushoff
Overall Size: 190" L x 97" W x 73" High

-(2) Scrap Winders:
S/N: 1740-1741
Dual Opposed Cones
36" W x 38" Dia. Ball
Hydraulic Level Wind
Hydraulic Motor Powered
Overall Size: 93" L x 54" W x 66" High

-Main Electrical Panel:
Overall Size: 67" L x 16" W x 84" High

**Temporary Specifications Subject to Revisions**

** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**