8.5" x 1.250" RUESCH MODEL 189 RING SLITTING LINE (13807)

MACHINE 13807

Ruesch Model #189 Slitting Line

-Thickness Range: 0.0005" to 0.020" (0.0005-0.50mm)
-Speed: 300 FPM Max. (91 m/min)
-Max. width: 8.5" (216mm)
-Line Direction: Right to Left

Consisting of the following:

-Uncoiler: Rapid-Air
Model: RA1512
1,500# x 12" Capacity
Manual Link-Type Expansion
14" - 22" Expansion Range
Powered by 1/2 HP AC Motor, 115 V, 1 Ph.
Loop Control Arm
6 Coil Keepers
48" Coil O.D. Capacity
Passline: 33" from Floor to Center of Mandrel
Overall Size: 43" L x 40" W x 57" High
675 Lbs.

-Ruesch Slitter Head:
8.5" (216mm) Wde x 1.25" (31.75mm) Dia. Arbor)
(2) entry tables with edge guides
manual width adjustment from both sides
Steel Stripper Ring Assembly
Burr Masher at Exit
Independent Arbor Adj.
5 HP DC Motor - 2500 RPM
Reliance R.A. Reducer w/6:1 Ratio

-Tooling, complete sets of spacers and stripper rings
Kinfe count
-10 x 0.6805" w -20 x 0.4835" w
-14 x 0.6245" w -14 x 0.4685" w
-16 x 0.5925" w -16 x 0.4055" w
-18 x 0.5630" w -15 x 0.3115" w
-10 x 0.2245" w -13 x 0.2170" w
-20 x 0.1865" w -6 x 0.1690" w
-13 x 0.1560" w -23 x 0.1385" w
-12 x 0.1200" w

-Integral Recoiler Base:
Scrap Winder, 10" Wide x 6" ID & 12" OD Ball Capacity
Air Brake for Tension Control
Driven by Chain from Slitter Head
2 Rewind Shafts, 2" Diameter
1 Recoiler Drum - Solid Drum, 6" Dia. x 17" Face
1 Recoiler Drum - Solid Drum, 6" Dia. x 11" Face
3" ID x 11.5" OD x 17" total length of micarta discs 1" to 3" wide each
12" ID keeper rings
6" ID keeper rings

-Reliance Controls:

-Reliance Operator Station:

**Temporary Specifications Subject to Revisions**

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**