4 1/4" (108mm) MITCHELL 6 DIE HYDRAULIC PUSH POINTER (13599)

MACHINE #13599

SPECIFICATIONS:
MANUFACTURER: GEORGE MITCHELL & CO. (U.S.A.)
TYPE: HYDRAULIC PUSH POINTER
NO. OF DIE STATIONS: 6

CAPACITY:
MAXIMUM TUBE O.D.: 4-1/4" (108 MM)
MINIMUM TUBE O.D.: 1-3/4" (45 MM)
RATED: 75,000 LB. (34,000 KG) @ 1910 PSI
MAXIMUM: 98,175 LB. (44,531 KG) @ 2500 PSI
POINTING DIES: 6" O.D. x 2-1/2" THICK
AUTOMATIC CYCLE: 1, 2, 3, 4, 5 OR 6 PUSH

POINTING SPEEDS:
ADVANCE: 272 IPM @ 2000 PSI
RETURN: 369 IPM @ 1000 PSI

DIE HOLDER: SIX (6) HOLE ROTARY WITH 6.020" ROUND 4-1/32" DEEP CAVITIES
DIE POSITIONING: AUTOMATIC BY ROLLER CAM INDEX AND HYDRAULIC MOTOR DRIVE
MAXIMUM TRAVEL OF DIES: 16"

TUBE GRIPPER JAWS: SQUARE, HEXAGON, OR OCTAGON
FIXED SINGLE SIDED: 4-1/4" (108 MM) O.D. AND UNDER
FIXED TWO SIDED: 3-1/2" (89 MM) O.D. AND UNDER
SQUARE ROTARY: 2-3/8" (60 MM) O.D. AND UNDER
HEXAGONAL ROTARY: 1-3/4" (45 MM) O.D. AND UNDER
OCTAGONAL ROTARY: 1-5/16" (33 MM) O.D. AND UNDER
LENGTH OF GRIPPER JAWS: 16" (406 MM)
MAXIMUM OPENING BETWEEN JAWS: 2-1/2" (63 MM)
CLAMPING MECHANISM: HYDRAULIC CYLINDER & DOUBLE TOGGLE
HYDRAULIC RESERVOIR: 150 GAL. CAPACITY
HYDRAULIC CYLINDERS:
TWO (2) @ 5" BORE X 2-1/2" ROD POINTING
ONE (1) @ 6" BORE X 2-1/2" ROD (DIE LOCK)
AIR CYLINDER:
ONE(1) 3-1/4" BORE X 1-3/4" ROD
MAIN HYDRAULIC PUMP: 46 GPM @ 2000 PSI 2 1200 RPM (PUSH & CLAMP)
AUX. HYDRAULIC PUMP: 10.6 GPM @ 1000 PSI @ 1200 RPM
HYDRAULIC PUMP DRIVE MOTOR:
60 HP, 1200 RPM, TEFC FRAME 404-T, 230/460V 3 PH, 60 CYCLE
HYDRAULIC PUMP MOTOR STARTER: SIZE 4
(FULL VOLTAGE COMBINATION WITH FUSED DISCONNECT)
CONTROL CIRCUIT: 120V SINGLE PHASE
CONTROL RELAYS: 300V TYPE
POINTER CAN BE SET FOR: 1, 2, 3, 4, 5 & 6 PUSHES

** SPECIFICATIONS SUBJECT TO REVISIONS **

** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **