17 1/2" (450mm) x .004" (0.1mm) LEVELING LINE, REBUILT 2020 (13490)

MACHINE# 13490

BASIC SPECIFICATIONS OF REBUILT TENSION LEVELING LINE

NOTE: THIS TENSION LEVELER WILL BE REBUILT TO THE BUYER'S SPECIFICATIONS USING
AN EXISTING UNGERER TENSION LEVELER AND BRIDLE ROLLS. MOST OTHER COMPONENTS
WILL BE MADE NEW. DELEVERY TIME APPROXIMATELY SIX MONTHS.

1-01. RAW MATERIAL :
COLD ROLLED STAINLESS STEEL 300, 400 GRADE & SPECIAL ALLOYS STEEL

1-02. WIDTH : 250mm ~ 450mm (9.8" - 17.7") (CAN BE 500mm) (19.6")

1-03. THICKNESS : 0.1 mm ~ 0.8 mm (.004" - .0315")

1-04. MECHANICAL PROPERTIES :
YIELD STRENGTH: 1100N/mm2 MAX.
ULTIMATE STRENGTH: 1450N/mm2 MAX.

1-05. INCOMING/RECOILING COIL SPEC. :
COIL I.D.: 508mm (20") (ONLY FOR REFERENCE)
COIL O.D.: MAX. 1,400mm (55") (ONLY FOR REFERENCE)
COIL WEIGHT: MAX. 5 TON (ONLY FOR REFERENCE)

1-06. LINE SPEED :
PROCESSING (TENSION): MAX. 80 MPM (262 FPM)
THREADING SPEED: 20 MPM (65 FPM)

1-07. TENSION :
UNCOILER: MAX. 600 Kgs (1322 Lbs.)
TENSION LEVELER: MAX. 12,000 Kgs (12,645 Lbs.) at Exit (TO BE DISCUSSED)
RECOILER: MAX. 1,250 Kgs (2,755 Lbs.)

1-08. HYDRAULIC SOURCE :
MAX. PRESSURE: 140 Kg/?
(NORMAL PRESSURE: 100 Kg/?)

1-09. ELECTRICAL SOURCE :
MAIN POWER VOLTAGE: AC 440V +/- 10%, 50HZ +/-3%, 3 PHASE
CONTROL VOLTAGE: AC 110V, 50HZ, SINGLE PHASE AND DC 24V

1-10. COMPRESSED AIR SOURCE :
MAX. PRESSURE: 7 kg/?
(NORMAL PRESSURE: 5 kg/?)

COMPONENTS OF THE TENSION LEVELLER LINE:

2-01. ENTRY COIL SKID - 1 SET (NEW)
2-02. ENTRY COIL CAR - 1 SET (NEW)
2-03. PAPER WINDER - 1 SET (NEW)
2-04. PAY OFF REEL - 1 SET (NEW)
2-05. SNUBBER ROLL - 1 SET (NEW)
2-06. ENTRY PINCH ROLL WITH THREADING TABLE - 1 SET (NEW)
2-07. WELDER OPTION - NOT INCLUDED
2-08. ENTRY BRIDLE ROLL - 1 SET (USED)
2-09. BEND LEVELLING ROLL UNIT (UNGERER LEVELER) - 1 SET (USED)
2-10. EXIT BRIDLE ROLL - 1 SET (USED)
2-11. INSPECTION TABLE - 1 SET (NEW)
2-12. EXIT DEFLECTOR ROLL - 1 SET (NEW)
2-13. TENSION REEL - 1 SET (NEW)
2-14. PAPER UNWINDER - 1 SET (NEW)
2-15. EXIT COIL CAR - 1 SET (NEW)
2-16. HYDRAULIC SYSTEM - 1 SET (NEW)
2-17. ELECTRICAL SYSTEM - 1 SET (NEW)

3-01. THIS LINE WILL USE AN EXISTING UNGERER LEVELER WITH THE ENTRY AND EXIT
BRIDLE ROLLS. ALL OTHER COMPONENTS WILL BE NEW INCLUDING ALL HYDRAULICS AND
ELECTRICS.

THE LINE WILL BE INSTALLED AND TESTED PRIOR TO SHIPMENT.

PRICE INCLUDES EXPORT PACKING/CONTAINERIZATION. TECHNICAL ASSISTANCE FOR
INSTALLATION AND START-UP AT YOUR PLANT SITE IS AVAILABLE AT AN EXTRA COST
TO BE NEGOTIATED SEPARATELY.

** Temporary Specifications Subject to Revisions**

** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **