36" (915mm) MACBEE DOUBLE BLOCK WIRE DRAWING LINE WITH PAYOFF & TAKE-UP (13207)

MACHINE# 13207

SPECIFICATIONS:

MANUFACTURER: MACBEE ENGINEERING CORP. (U.S.A.)
YEAR OF MANUFACTURE: 2001

TYPE: HORIZONTAL SIDEWINDER CONTINUOUS WIRE DRAWING LINE WITH PAYOFF, DUAL
DRAWING BLOCKS, TAKE-UP, DANCERS AND A.C. INVERTER VARIABLE SPEED CONTROLS.
MAY BE SUITABLE FOR SINK DRAWING OF SMALL DIAMETER TUBE.

PAYOFF:
MANUFACTURER: MACBEE ENGINEERING CORP. (U.S.A.)
MODEL No.: 48/60-PO
SERIAL No.: 6722
EQUIPMENT No.: 04360P003A
MAXIMUM COIL WEIGHT: 250 LBS. (113 KG)
MAXIMUM COIL O.D.: 48" (1220mm)
COIL O.D.: 36"- 48" (915mm - 1220mm)

WIRE DRAWING BLOCK:
MANUFACTURER: MACBEE ENGINEERING CORP. (U.S.A.)
TYPE: HORIZONTAL SIDEWINDER
MODEL No.: 36SWBB-20
QUANTITY: 2
SERIAL No.: 6724-A & 6724-B
MAXIMUM ENTRY DIAMETER: .314" (7.97mm) SOLID ROD
* NOTE: PREVIOUS OWNER DREW UP TO 1/2" (12.7mm) @ 30 FPM (9.2m/Min.)
SPEED RANGE:
MINIMUM: 30.1 FPM (9.2m/Min.)
MAXIMUM: 96 FPM (30m/Min.)
DIE PULL:
BLOCK No. 1: 7000 LBS. (3,182 KG)
BLOCK No. 2: 7000 LBS. (3,182 KG)
BLOCK DIAMETER: 36" (915mm)
PRESSURE SNUBBER ROLL: 20 HP, 1780 RPM, 27 AMPS, 3 PH., 460 VOLTS, 60 HZ
WITH MAGNETEK VARIABLE SPEED INVERTER DRIVE
GEAR REDUCER: SUMITOMO GEAR SPEED REDUCER WITH TIMKEN ROLLER BEARINGS
PARAMAX 55.1 RATIO
DANCER ARMS IN BETWEEN BLOCKS FOR SPEED CONTROL

TAKE-UP:
MANUFACTURER: MACBEE ENGINEERING CORP. (U.S.A.)
TYPE: COLLAPSIBLE TAKE-UP
TAKE-UP DIAMETER: 36" (915mm)
MAXIMUM COIL CAPACITY: 500 LBS. (227 KG)
DRIVE MOTOR: 10 HP, 1750 RPM, 3 PH., 60 HZ
GEARBOX: RADICON/DAVID BROWN

EQUIPPED WITH FILTERTECH MODEL F4240 SOLUTION CLEANING SYSTEM

PREVIOUS USE INCLUDED SUPERCONDUCTOR WIRE ALTHOUGH THE MACHINE WILL DRAW
NEARLY ALL ALLOYS.

**Machine is Dismantled and Lying in Storage**

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**