50" (1270mm) x 6" (152mm) McKAY SLITTING LINE (12956)

MACHINE# 12956

SPECIFICATIONS:

MANUFACTURER: THE McKAY MACHINE CO. (U.S.A.)
TYPE: PULL THROUGH SLITTING LINE

ARBOR SIZE:
WIDTH: 52" (1320mm)
DIAMETER: 6" (152.4mm)

MAXIMUM WIDTH:
UNTRIMMED: 50" (1270mm)
TRIMMED: 48" (1220mm)

THICKNESS RANGE (STEEL):
MAXIMUM: 0.089" (2.26mm)
MINIMUM: 0.0185" (0.47mm)

ENTRY COIL SIZE:
I.D.: 20" (508mm)
MINIMUM O.D.: 48" (1220mm)
MAXIMUM O.D.: 72" (1830mm)

EXIT COIL SIZE:
I.D.: 20" (508mm)
O.D.: 54" (1370mm)

LINE SPEED:
GEAR 1: 50-250 RPM (15-76 m/min.)
GEAR 2: 100-500 RPM (30-152 m/min.)

MAXIMUM COIL WEIGHT:
UNCOILER: 48,000 LBS. (21,772 M TONS)
RECOILER: 24,000 LBS. (10,886 M TONS)

RATED CAPACITY:
9 CUTS 0.089" @ 250 FPM
10 CUTS 0.078" @ 250 RPM
13 CUTS 0.062" @ 250 FPM
15 CUTS 0.050" @ 250 FPM
17 CUTS 0.038" @ 250 FPM
20 CUTS 0.032" @ 500 FPM
24 CUTS 0.0255" @ 500 FPM

THE LINE CONSISTS OF:

UNCOILER:
MAXIMUM COIL WEIGHT: 48,000 LBS. (21,772 M TONS)
DRUM LENGTH: 52" (1320mm)
MAXIMUM COIL O.D.: 48"- 72" (1220mm - 1830mm)
COIL HOLDDOWN ROLL: HYDRAULIC
SLIDING BASE
COIL CAR

EDGE GUIDE SYSTEM

SLITTER HEAD:
ARBOR SIZE: 6" (152mm) DIA. x 52" (1320mm) FACE
ARBOR ADJUSTMENT: MANUAL
DRIVE MOTOR: 5 HP FEED UP DRIVE
ENTRY PINCH ROLL 1: NON-DRIVEN
SIDE GUIDES: MANUAL
ENTRY PINCH ROLL 2: DRIVEN W/HYDRAULIC ADJUST

EDGE GUIDE SYSTEM

SCRAP WINDER

RECOILER:
MAXIMUM COIL WEIGHT: 24,000 LBS. (10,886 M TONS)
COIL I.D.: 20" (508mm)
COIL O.D.: 54" (1376mm)
DRIVE MOTOR: 75 HP, AC, 3 PH., 60 HZ
OVERARM SEPARATOR: HYDRAULIC
SINGLE ARM TURNSTILE: HYDRAULIC PUSH-OFF

DIRECTION OF TRAVEL: RIGHT TO LEFT

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**