50,000 LB. MANNESMANN MEER 3 DIE DRAWBENCH (12735)

MACHINE# 12735

SPECIFICATIONS:

MANUFACTURER: MANNESMANN MEER (GERMANY)
TYPE: 3 DIE DRAWBENCH FOR TUBE

RATED PULLING FORCE:
22.5 METRIC TON @ 164 FPM (50 m/min.)
11.25 METRIC TON @ 328 FPM (100 m/min.)

No. OF TUBE DRAWN: 1, 2 OR 3
DUAL 25mm STEEL CABLE PULL - BOTTOM DROP DISCHARGE

BARREL ROLLOVER FEED

MAXIMUM LENGTH OF DRAW: 75 FT. (23 m)
MAXIMUM ENTRY LENGTH: 59 FT. (18 m)

INCOMING DIAMETER:
3" (75 mm) FOR SINGLE DRAW
2.4" (60 mm) FOR DOUBLE DRAW
2" (50 mm) FOR TRIPLE DRAW

DRAWING SPEED:
165 FPM (50 m/min.) @22.5 TONS DRAWING POWER
328 FPM (100 m/min.) @ 11.25 TONS DRAWING POWER

RETURN SPEED: 410 FPM (125 m/min.)
TUBE LOADER: CABLE DRIVEN PUSHER WITH AREA FOR STORAGE OF BROKEN TUBES

MAXIMUM DRAWING DIE DIAMETER:
9.85" (250 mm) FOR SINGLE DRAW
7" (180 mm) FOR DOUBLE DRAW
5.1" (130 mm) FOR TRIPLE DRAW

DRIVE MOTOR: 2 x 150 HP, 230 VOLTS, 536 AMPS, 720/1800 RPM,
D.C. VARIABLE SPEED, MAWDSLEY (U.K.)

GEARBOX: MANNESMANN MEER HELICAL GEAR TYPE G62 WITH LUBE PUMP SYSTEM,
RATED 286 HP @ 720 RPM, GEAR RATIO 28 TO 1

CONTROLS: RELIANCE MODEL VS AUTOMATION SCR DRIVE

BUNDLE INFEED RACK WITH MOTORIZED FEED CRADLES AND CABLE DRIVEN
TUBE-PUSHER FOR TUBE LOADING INTO BARREL ROLLOVER MANDREL
GRIPPERS: PNEUMATIC CYLINDER FOR EACH JAW SET
DIE STAND: 3 DIE REMOVABLE DIE HEAD
PLUG GUIDE: ADJUSTABLE TUBE GUIDE IN FRONT OF DIE BLOCK
PLUG FEEDING: MANDREL ROD PNEUMATICALLY PUSHED FORWARD TO ENGAGE PLUG
PLUG FINE ADJUSTMENT: THREADED ADJUSTER OPERATED FROM DIE HEAD NEAR
OPERATOR'S STATION
BARREL ROLLOVER DRIVE: GEAR MOTOR AND CHAIN DRIVE
FEED TABLE: POWERED LIFT TUBE CRADLES
TUBE COLLECTOR: RUBBER LINED CATCH CRADLES
DRAWBENCH IS INSTALLED.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**