20" (508mm) FASTENER ENGINEERING No. DTV-02-20S BULL BLOCK [11930]

MACHINE# 11930

SPECIFICATIONS:

MANUFACTURER: FASTENER ENGINEERS (NOW RMG)-USA
MODEL No.: DTV-O2-20S W/NEW CONTROLS IN 2012
SERIAL No.: 994/6164
CAPSTAN DIAMETER: 20" (508mm)
TORQUE: 20,000 LBS. (9,072 KG)

SPEED RANGE (AS PER CATALOG):
8-70 FPM (2.4-22m/Min.)
4-35 FPM (1.2-10.6m/Min.)
3-25 FPM (O.9-7.62m/Min.)
2-18 FPM (0.6-5.5m/Min.)
1.5-14 FPM (0.45-4.3m/Min.)

TORQUE RANGE (AS PER MACHINE PLATE):
8.245 IN-LBS @ 80 FPM (24m/Min.)
12.370 IN-LBS @ 52 FPM (15.8m/Min.)

APPLICATION: IDEAL FOR SLOW-SPEED WIRE DRAWING OR
IN-LINE WITH A COLD HEADER BETWEEN
PAYOFF AND FEED ROLLS.

MOTOR: FACTORY-WIRED 110 CONTROL TRANSFORMER IN
CONTROL CENTER USED FOR 220/440 VOLT, 3 PH.,
60 HZ ELECTRICS USING PLUG-IN CONNECTION.

CONTROLS: ABB MODEL ACS 355
YEAR OF INSTALLATION: 2012
NOTE: THIS NEW CONTROLLER WAS 90% INSTALLED WHEN
THE MACHINE WAS PURCHASED BY US. PURCHASER
MUST COMPLETE THE DIAGNOSTICS USING THE
MANUAL WE WILL SUPPLY.

DIMENSIONS: 32" L x 26" W x 44" H
WEIGHT: 1080 LBS. (490 KG)

DRAWBOX: TILT TYPE FOR EITHER WET OR DRY LUBRICANTS AND
PIVOTING ACTION FOR LINE-UP OF DIE AND CAPSTAN

EQUIPPED WITH FORK LIFT RAILS FOR EASY RELOCATION AND PLUG-IN ELECTRICAL
CONNECTION.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**