8 1/2" (215mm) WATERBURY FARREL ZR15-8 1/2 SENDZIMIR MILL w/AGC [11909]

MACHINE# 11909

Manufacturer: Waterbury Farrel Co.
(Revamped in 1988 by
Intergated Industrial Systems)
Type: 12-HI Reversing Mill
Model: ZR 15 - 8-1/2"
Screwdowns: Hydraulic

Automatic Gauge Control System installed in 1988

Material Capacity:
Thickness:
Start: .060" (1.525mm)
Finish: .001" (0.025mm)
Width: 8 1/2" (215mm)
Mill Speed: 0-175 FPM (0-53m/min.)
Gauges - Thickness: Pratt & Whitney Model 10A
Winders: (2) Solid Block Type
Block Size: 10" (254mm) Dia. x 8 3/4" (222mm) Face
Quantity of Winder Blocks: 20
Coil Size: 10" (254mm) I.D. x 24" (610mm) O.D.
Winder Tension: 250-1200 Lb. (113-545 Kg)

Payoff Tension: 0-500 Lb. (0-227 Kg)
Roll Separating Force: 6000 Lb./In. (107 Kg/mm)
Maximum Coil Weight: 1000 Lb. (454 Kg)
Work Roll Face: 10 1/4" (266mm)
Work Roll Diameter: .468" (12mm)
First Intermediate Roll Diameter: .937" (24mm)
Drive Rolls: First Intermediate
Bearing Diameter: 2.938" (75mm)

Quantity of Rolls Available with Mill:
- Work Rolls: Approx. 220
- First Intermediate Rolls: Approx. 150

Mill is Equipped with:
Payoff:
Shaft Size: 2" (50mm) Dia. x 8 1/2" (215mm)
Drive Motor: 3/4 HP, 1725 RPM, 90 Volt,
8.2 Amps Dayton D.C.
Speed Controller: Dart Model 250

Entry Wipers/Pressure Board: Width 8 1/2" (215mm)
Entry Pressure Roll:
Roll Size: 4" (100mm) Dia. x 9" (230mm) Face
Load Cell Transducer: Sensotec Amplified Transducer
Model No.: 73-3296-04
Range: 0-1000 Lb. (0-454 Kg)
Serial No.: 199 424
Electrical Controls: SCR Thyristor installed in 1988 by
Intergrated Industrial Systems
Automatic Gauge Control System: Statistical Process Control System
Installed in 1988 By Intergrated
Industrial Systems
Drive Motors
Main Drive: 15 HP, 230 Volt, 56 Amps, 850-1700 RPM,
Westinghouse Type SK D.C. Variable Speed

Winder Motors (2): 5 HP, 230 Volt, 19.5 Amps, 450 RPM,
Westinghouse D.C. Gear Motor with
9.21 to 1 Ratio, Maximum Output 49 RPM

Hydraulic Unit: 3 HP, 1160 RPM, 230/460 Volt, U.S.
Electric with Moog Filter System and
Thermal Transfer Products Heat Exchanger

Lubrication Pump: 1 HP, 855 RPM, 230/460 Volt, 4.6 Amps,
with Rosedale Model No. 41 Cartridge
Filter System, with Square D Pressure
Regulator, 0-40 psi Pressure Differential,
255 psi Maximum Pressure,
and 8-20 psi Sensitivity

Equipped with 4 Step-Up Transformers

Transformer No. 1:
Manufacturer: Walker Power
Model No.: D13-012PISX-E
Serial No.: 62-0135-002
Weight: 200 Lb.
12 KVA
230 Pri Volts
330Y/191 Sec. Volts
115 Degrees C Rise
3.35% IMP
60 Hz
135 Degrees C
Pri Tap -5 N +5
Connect 1-4 1-3 2-3

Transformer No. 2:
Same as No. 1
Serial No.: 62-0135-001

Transformer No. 3:
Manufacturer: Square D
Cat. No.: 45T6H

Style No.: 33749-28212-023
Weight: 330 Lb.
45 KVA, 60 Hz
480 HV
54 HV Amps
240 LV
108 LV Amps
150 Degrees C Rise

Transformer No. 4:
Manufacturer: Walker Power
Model No.: D13-034P16X-E
Serial No.: 62-0136-001
Weight: 375 Lb.
34 KVA, 60 Hz
230 Pri Volts
330Y/191 Sec. Volts
150 Degrees C Rise
3.85% Imp.
Pri Tap. -5 N +5
Connect 1-4 1-3 2-3

Dimensions:
Main Body: 8 Ft. x 8 Ft. x 74" High
(2.45m x 2.45m x 1880mm High)

Electrical Panel: 11 Ft. (3.335mm) L x 8 1/2 Ft. (2.6m) H

Approx. Mill Weight: 16,000 Lbs. (7250 Kg)

Overall Floor Space Including
Electrical Panel,
Operator Station,
and Transformer: 22 1/2 Ft. (7m) Deep x 13 Ft. (4m) Across

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**