4" X 1", ACCURATE WIRE WIRE FLATTENING LINE (11853)

MACHINE #11853

SPECIFICATIONS

-MANUFACTURER: ACCURATE WIRE

-TYPE: WIRE FLATTENING LINE
-ALL COMPONENTS MOUNTED ON A COMMON BASE

-SPEED: 800 FPM (243 MPM)

LINE CONSISTS OF THE FOLLOWING:

(1) DANCER
-TYPE: 3 ROLL- 2 FIXED AND 1 MOVABLE
CENTER ROLL MOVES UP AND DOWN TO OPERATE AS A
SPEED CONTROL BETWEEN THE PAYOFF (NOT INCLUDED)
THE MILL STAND. CENTER ROLLS IS WEIGHTED TO APPLY
TENSION ON THE WIRE AND A SPEED SIGNAL IS
SUPPLIED TO THE DRIVE BY MEANS OF A STRING
POTENTIOMETER.
-ROLL SIZE: 6" (152.4mm) DIAMETER

(1) TYPE: WIRE FLATTENING MILL
-ROLL SIZE
-DIAMETER: 4" (101.6mm)
-ROLL FACE: 1" (25.4 mm)

-ROLL TYPE: CARBIDE SHELL/ WATER COOLED
-NOTE: NO COOLING SYSTEM IS INCLUDED WITH LINE

-COLUMN SIZE: 1 7/8" X 1 1/2" (47.6mm X 38.1mm)
-WINDOW OPENING: 4 1/2" (114.3mm)

-SCREWDOWN TYPE: MANUAL

-SPEED REDUCTION: VIA TIMING BELT FROM DRIVE MOTOR TO PINION STAND

-MAIN DRIVE MOTOR: 10 HP (5.8Kw) 1750 RPM DC

(1) DANCER: 3 ROLL- 2 FIXED AND 1 MOVABLE
CENTER ROLL MOVES UP AND DOWN TO OPERATE AS A
SPEED CONTROL BETWEEN THE TRAVERSING SPOOLER AND
THE MILL STAND BEFORE IT. CENTER ROLL IS SPRING
LOADED IN THE TOP POSITION TO APPLY TENSION ON
THE WIRE AND A SPEED SIGNAL IS SUPPLIED TO THE
DRIVE BY MEANS OF A POTENTIOMETER.
-ROLL SIZE: 4" (101.6mm) DIAMETER

(1) WIPER BOX

(1) TRAVERSING SPOOLER
-TYPE: HYDRAULIC TRAVERSING

-SPOOL SIZE
-TYPE: PLASTIC
-DIAMETER: 6" (152.4mm)
-FACE WIDTH: 4" (101.6mm)

-DRIVE MOTOR: 2 HP (1.15Kw) 1750 RPM DC

INCLUDED WITH THE LINE ARE THE ELECTRICS AND CONTROLS.

NOTE: PHOTOS SHOWN WITH THIS QUOTATION ARE SIMILAR TO THE MILL QUOTED BUT NOT
THE ACTUAL MILL.

**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**