2-1/2" X 8-1/2" X 10" WATERBURY FARREL NON REVERSING ROLLING MILL (11841)

MACHINE #11841

MANUFACTURER: WATERBURY FARREL FOUNDRY
SERIAL No.: 169405
TYPE MILL: 4-HI NON-REVERSING
WORK ROLL DRIVEN
WORK ROLL SIZE: 2.500" x 10" (63.50mm x 254mm)
BACK UP ROLL SIZE: 8.5" x 10" (215.9mm x 254mm)
SPINDLES AND COUPLINGS: UNIVERSAL
SCREWDOWN: ELECTRO-MECHANICAL POWER SCREWDOWN
SCREWDOWN DRIVE: 2 x 1 HP, 860 RPM, 208 V, 3 PH, 60 HZ
MILL STAND CROSS SECTION: 5 1/4" x 4 1/4"
WINDOW WIDTH: 9 1/2"
ENTRY WIPER PADS:

MILL DRIVE MOTOR: 50 HP, 575/1700 RPM, 230 V, 184 AMPS,
GENERAL ELECTRIC D.C. w/TACH GENERATOR MOTOR
GEAR REDUCTION: 3.250 TO 1
MILL SPEEDS: 0/100/300 FPM

PAYOFF:
MANUFACTURER: LITTELL MFG CO
MODEL No.: 25-12
SERIAL No.: 81237-74-1
CAPACITY: 2500 LBS.
COIL I.D. RANGE: 16"- 20"
MAXIMUM COIL I.D.: 48"
TYPE EXPANSION: 7 1/2 HP, 1750-3500, 17.6 AMPS, RELIANCE D.C.
INTO A RELIANCE GEARMOTOR WITH 4.13/1 RATIO
RECOILER:
MANUFACTURER: WATERBURY FARREL
TYPE: EXPANDING BLOCK
BLOCK SIZE: 12" (305mm) DIA. x 10" (267mm) FACE WIDTH
TYPE OF EXPANSION: HYDRAULIC
TYPE OF COIL PUSHOFF: HYDRAULIC
DRIVE MOTOR: 25 HP, 208-220 VOLT, 1800 RPM,
64 AMPS, U.S. ELECTRIC, S/N 2528365
TWO STAGE GEAR REDUCER
- STAGE 1: TURNER 4 SPEED WITH RATIOS OF:
2.44 TO 1
1.63 TO 1
1.49 TO 1
1 to 1
- STAGE 2: PHILADELPHIA GEAR BOX w/RATIO OF 15.5 TO 1

RECOILER EQUIPPED WITH A CUTLER HAMMER CLUTCH

MILL EQUIPPED WITH VARIABLE TENSION CAPABILITY ON BOTH PAYOFF AND RECOILER

ELECTRONICS:
MANUFACTURER: EUROTHERM
MODEL No.: MODEL 590 ON MAIN MILL DRIVE
MODEL 514C ON PAYOFF
TYPE: SCR THYRISTOR DRIVES
YEAR ELECTRONICS INSTALLED: 1999

EQUIPPED WITH EXTERNAL HYDRAULIC PUMP SYSTEM
TWO SPARE SETS OF WORK ROLLS
ONE SPARE SET OF DRIVE SPINDLES

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**