6" (152mm) x .250" (6.3mm) EDGE CONDITIONING LINE [11741]

MACHINE # 11741

An Edge Conditioning Line for wire and narrow strip consisting of a non-driven
payoff, flattening roll, four (4) sets of edging rolls, flattening roll and
recoiler.

Edge conditioner capacity: .060" (1.524mm) -.250" (6.35mm) THICK
.750" (19.05mm) - 6" (152.4mm) WIDE

Maximum Coil Weight: 7,000 lbs. (3100 kg)

Line Speed: 100 FPM (31.25 MPM) Variable

Electrics: 480 Volt, 3 Phase, 60 Amps

Uncoiler:
Type: Non-Driven Horizontal
Maximum coil O.D.: 60"
Manual Side Guards
Coils loaded by hoist or fork lift supplied by purchaser.

Edge Conditioning Stand:
Roll Stand No. 1:
Roll Size: 8" (203mm) Dia. x 6 1/2" (165mm) Force
Chain Drive
Drive Motor: 15 HP, 220/440 Volts, 39.2/19.6 Amps,
3 Phase, 60 Hz, General Electric w/A.C.
Inverter Drive for Variable Speed
Pneumatic Bladders to provide Vertical Roll Pressure

Edging Stand:
No. of Rolls: 4 Sets
Roll Size: 4" (101mm) Dia. 2" (50mm) Face
Non-Driven
Pneumatic Bladder to provide Side Roll Pressure

Roll Stand No. 2:
Roll Size: 8" (203mm) Dia. x 6 1/2" (165mm) Face
Chain Drive: from same Motor as on Roll Stand No. 1
Pneumatic Bladders to provide Vertical Roll Pressure

Winder:
Type: Mandrel Block w/Griper Slot
Block Diameter: 20" (508mm)
Block Face: 9" (230mm)
Maximum Coil O.D.: 60" (1524mm)
Bottom Coil Snubber: Hydraulic
Coil Pushoff: Hydraulic
Drive Motor: 15 HP, (Estimated-No Plate)
Gear Reducer: Sumitomo Chain Drive rated 15.6 HP,
1750 RPM, 17 to 1 Ratio,
Output Torque 8840 in./Lb.

Starter Motor: 1/3 HP, 208-230/460 Volt, 3450 RPM,
3 Phase, 60 Hz, Baldor

Equipped with Hydraulic Downender for Coil Extraction.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**