2-1/2" X 8" X 8" RUESCH MODEL 129 4 HIGH REVERSING ROLLING MILL (10981)

MACHINE # 10981

SPECIFICATIONS

-MANUFACTURER: H J RUESCH COMPANY

-MODEL: 129

-TYPE MILL: 4 HIGH REVERSING ROLLING MILL
BACK UP ROLL DRIVEN

-SPEED: 100 FPM (30 mpm) BASED ON WINDER SPEED
-ROLLS
-WORK ROLLS: 2-1/2" (63.5mm) DIAMETER X 8" (203.2mm) WIDE
-BACK UP ROLLS: 8" (203.2mm) DIAMTER X 8" (203.2mm) WIDE

-COLUMN SIZE: 6" X 7 1/4" (152.4mm X 181.3mm)
-WINDOW OPENING: 9" (228.6mm)

-SCREWDOWNS
-TYPE: ELECTRO-MECHANICAL- DUAL MOTOR
-MOTORS: 1 1/2 HP (1.11kw)1800 RPM
230/460 VOLTS

-BEARINGS: ROLLER- GREASE LUBE

-DRIVE MOTOR: WER 20 HP 1750 RPM DC

-GEAR BOX: FALK REDUCER/PINION STAND
MODEL 6 5DC2-02AS
RATIO: 26.17:1
INPUT RPM: 1750
OUTPUT RPM:58
S/F: 1.58
DOM: 1979

-MILL IS EQUIPPED WITH A ROLL WIPER, AIR OPERATED ROLL LIFTERS AND SCREWDOWN
OVER TRAVEL LIMIT SWITCHES.

-WINDERS
-TYPE: EXPANDING MANDREL

-MANDREL
-TYPE: MANUAL EXPANSION
-DIAMETER: 20" (508mm)
-FACE WIDTH: 7 1/2" (190.5mm)

-DRIVE MOTOR: WER 10 HP (7.5kw) 1750 RPM DC W/BLOWER
ARM VOLTS: 240
ARM AMPS: 36.6
FLD VOLTS: 150
FLD AMPS: 2.74

-GEARBOX: HORSBOUGH & SCOTT
SIZE 70-2
RATIO: 84.6:1
HP RATING: 10 HP
INPUT RPM: 1750
S/F: .944

-NOTE: BOTH WINDERS ARE EQUIPPED WITH SNUBBER SET UPS FOR SECURING STOCK
TAIL PIECE BUT LEFT WINDER SNUBBER ARM IS MISSING. BOTH ALSO HAVE AIR
HOLDING BRAKES AND HYDRAULIC COIL PUSH OFF (5 HP (3.7kw) 3450 RPM) HYD
POWER UNIT IS LOCATED ON BACK AREA OF LEFT WINDER.

-MILL LINE IS EQUIPPED WITH WER INDUSTRIAL DRIVES AND CONTROLS.

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**