24" x .125" HALLDEN CUT-TO-LENGTH LINE (10827)

MACHINE # 10827

SPECIFICATIONS:

MANUFACTURER: HALLDEN SHEAR SERVICES INC. (U.S.A.)
TYPE: LEVELER WITH FLYING GUILLOTINE SHEAR
MODEL: TYPE 52
SERIAL No.: 5221
CAPACITY (BRASS): .010"- .125" (0.25mm - 3.75mm)
DIRECTION OF TRAVEL: LEFT TO RIGHT
MAXIMUM STRIP SPEED: 20 - 225 FPM (60m - 68m/MIN.)

UNCOILER:
MANUFACTURER: COOPER WEYMOUTH CORP. (U.S.A.)
RATED CAPACITY: 2500 LBS. (1135 KG)
MAXIMUM STRIP WIDTH: 24" (610mm)
COIL I.D. RANGE: 11.5" -17.5" (292mm - 444mm)
MAXIMUM COIL O.D. OF COIL: 48" (1220mm)
SERIAL No.: CWP250024P2736
MANDREL EXPANSION
COIL HOLDDOWN ARM: HYDRAULIC
HYDRAULIC UNIT: MILLER 2 HP, 430 VOLT
BACK TENSION: HYDRAULIC

LEVELER:
MANUFACTURER: HALLDEN SHEAR SERVICES INC. (U.S.A.)
MODEL: TYPE 52
ENTRY PINCH ROLLS:
TYPE: NEOPRENE
SIZE: 3" (76mm) DIA. x 27 1/2" (700mm) WIDE
MANUAL SIDE GUIDES

LEVELER ROLLS:
SIZE: 2.9375" (74.6mm) DIA. x 28" (711mm) WIDE
No. OF ROLLS: 9 (5 OVER 4)
No. OF ROLLS DRIVEN: 9
DRIVE: 15 HP, 1750 RPM, 220/440 VOLT, 3 PH.,
60 HZ INTO A LINKBELT P.I.V. GEAR,
ORDER No. L7-26460, SIZE HM-5, RATIO 4/1,
RATED 13.5 HP, 1160 RPM, CONSTANT SPEED 580 RPM,
VARIABLE SPEED OF SHAFT FROM 1160 RPM
AT 13.5 HP TO 290 RPM AT 6.8 HP
SHEAR:
MODEL: TYPE 52
TYPE: SYNCHRONIZED GUILLOTINE FLYING SHEAR
LENGTH OF CUT RANGE: MINIMUM 6", MAXIMUM 10 FT.
EDGE SHEAR KNIVES: 28" LONG PN 52-12001
NOMINAL CAPACITY: 0.054" MILD STEEL
0.090" HALF HARD BRASS

PREVIOUS USAGE (BRASS):
18" (457mm) WIDE .010" - .060" (0.25mm - 1.5mm)
10" (254mm) WIDE .061" - .100" (1.51mm - 2.54mm)
8" (203mm) WIDE .101" - .125" (2.55mm - 3.175mm)

RATED ACCURACY: +/- 1/16" (1.58mm)

SHEAR DRIVE: USES A LINKBELT P.I.V. UNIT PROVIDING INFINITELY
VARIABLE SPEEDS THROUGH A 5 TO 1 RATIO

MANUFACTURER: LINKBELT SIZE H5, ORDER No. L7-26461,
CHAIN 5-32, RATIO 5 TO 1, CONSTANT SHAFT RPM 500,
VARIABLE SHAFT SPEED OF 1120 RPM AT 9 HP TO
224 RPM AT 4 HP DRIVEN DIRECTLY FROM MAIN MOTOR.

PURCHASER TO SUPPLY RUNOUT TABLE

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**