SCHUMAG MODEL KZRP-IIB COMBINED MACHINE (10822)

MACHINE #10822

SPECIFICATIONS

-MANUFACTURER: SCHUMAG

-MODEL: KZRP-IIB

-TYPE: COMBINED STRAIGHTEN, DRAW, CUTOFF & POLISH
WITH DOUBLE END SAW AND CHAMFERING STATION

-CAPACITY-SOLID
-ROUND
-MINIMUM: 9mm (.354")
-MAXIMUM: 28mm (1.102")

-SHAPES
-HEX
-MINIMUM: 10mm (.393") ACROSS FLATS
-MAXIMUM: 25mm (.984") ACROSS FLATS

-SQUARE
-MINIMUM: 10mm (.393") ACROSS FLATS
-MAXIMUM: 25mm (.984") ACROSS FLATS

-MAXIMUM PULL: 18000 Kp (39,600 Lbs)

-MAXIMUM SPEED: 60m/MIN (196 FPM)

-MAIN DRIVE MOTOR: 149kw (200 HP) 1150/1400 RPM DC MOTOR

-LINE CONSISTS OF THE FOLLOWING:

-LAZY SUSAN TYPE VERTICAL PAYOFF/HYDRAULIC SLIDING BASE
-56" (1422mm) DIAMETER FLANGE X 24" (610mm) I.D. X 66" (1676mm) HIGH

-COIL OPENER
-MANUFACTURER: SCHUMAG
-MODEL: RiBiII

-TYPE: 5 ROLL- ALL ROLLS DRIVEN
-DATE OF MFG: 1982

-CAPACITY
-ROUNDS/HEX: 10mm (.394")MINIMUM TO 31mm (1.220")MAXIMUM
-SQUARES: 10mm (.394")MINIMUM TO 28mm (1.102")MAXIMUM

-ENTRY TROUGH
-LENGTH: 13'-6" (3.9m)
-WIDE: 13" (343mm)
-DEPTH: 15" (381mm)

-PRE-STRAIGHTENER
-TYPE: TWO PLANE WITH PINCH ROLLS

-PINCH ROLLS: 1 PAIR-DRIVEN
-DIAMETER: 9 1/2" (241mm)
-FACE WIDTH: 2 1/4" (57mm)

-VERTICAL ROLLS
-QUANTITY: 5 (2 DRIVEN)
-DIAMETER: 7 3/8" (187mm)
-FACE WIDTH: 2 1/4" (57mm)

-HORIZONTAL ROLLS
-QUANTITY: 4 (UNDRIVEN)
-DIAMETER: 7 3/8" (187mm)
-ROLL FACE: 4" (102mm)

-NOTE: PRE-STRAIGHTENER INCLUDES 1 PAIR OF VERTICAL AND 2 PAIR OF
HORIZONTAL GUIDE ROLLS.

-DRAWING SECTION (CARRIAGE)
-V-GROOVE WAYS
-CAM RETURN

-STRAIGHTENER
-TYPE: 2 PLANE
-7 ROLLS HORIZONTAL PLANE
-7 3/8" (187mm) DIA X 4 1/4" (108mm) FACE
-UPPER ROLLS DRIVEN

-7 ROLLS VERTICAL PLANE
-7 3/8" (187mm) DIA X 2 1/4" (57mm) FACE
-LOWER ROLLS DRIVEN

-CAM OPERATED FLYING SHEAR CUTOFF (AIR CYL ASSIST ON RETURN)

-GUIDE TUBE WITH STANDS AND POWERED PINCH ROLLS
-LENGTH: 22'-0" (6.7m)

-PINCH ROLLS
-DIAMETER: 4 1/4" (108mm)
-FACE WIDTH: 2" (50mm)

-POLISHER/STRAIGHTENER WITH POWERED PINCH ROLLS AT ENTRY
-DRIVE MOTOR: 50HP (37.3kw) 1760 RPM AC MOTOR

-GUIDE TUBE WITH STANDS
-LENGTH: 17'-0" (5.2m)

-EDDY CURRENT FAULT TESTER
-MANUFACTUER: MAGNETIC ANALYSIS CORP
-MODEL: 8XRB-8961

-RUNOUT TABLE

-SCHUMAG DOUBLE END SAW AND CHAMFERING STATION
-AUTOMATICALLY ACCEPTS CUT BARS AND PRESENTS THEM TO SAWS AND CHAMFERING
UNITS WHICH SIMULTANEOUSLY CUTS THE ENDS OFF THE BARS AND CHAMFERS EACH
END WITH A LATHE TYPE CHAMFERING UNITS. CONVEYOR THEN MOVES FINISHED BARS
TO STORAGE RACK.

-LENGTH: SET UP FOR 12'-0" BARS AT PRESENT- EXPANDABLE TO
APPROXIMATELY 16'-0" LONG BARS
-SAWS
-QUANTITY: 2
-BLADE DIAMETER: 12" (304.8mm)
-DRIVE MOTORS: 5 HP (3.7kw) 1760 RPM AC

-CHAMFERING STATION
-QUANTITY: 2
-DRIVE MOTORS: HYDRAULIC

**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**