19" (480mm) WATERBURY FARREL No. ZR23-19 SENDZIMIR REVERSING MILL (10543)

MACHINE #10543

SPECIFICATIONS:

MANUFACTURER: WATERBURY FARREL CORPORATION
MODEL No.: ZR23-19
TYPE: 20-HI COLD REVERSING SENDZIMIR MILL
PREVIOUS USE: BRASS
MAXIMUM INCOMING THICKNESS: .120" (3mm)
MINIMUM FINISH THICKNESS: .003" (.076mm)
MAXIMUM STRIP WIDTH: 19" (482mm)
MINIMUM STRIP WIDTH: 9" (228mm)
ROLLING SPEED: 0 - 1000 FPM (0 - 305m/MIN.)
AUTOMATIC GAUGE CONTROL (AGC): MASS FLOW
HYDRAULIC SCREWDOWNS

LINE CONSISTS OF:

PAYOFF:
TYPE: EXPANDING MANDREL
TYPE OF EXPANSION: HYDRAULIC
I.D. RANGE: 16"/18" (406/457mm)
22" (56mm) WITH EXPANSION PLATES
NOMINAL COIL O.D.: 43" (1092mm)
WIDTH OF PAYOFF: 23" (58mm)
MAXIMUM COIL WEIGHT: 7,600 LBS. (3450 KG)
PAPER UNWINDER
COIL CAR
PAYOFF DRIVE: 3HP, 750RPM, 3PH, 60HZ, w/32 TO 1 REDUCER
COIL SNUBBER HOLDDOWN: HYDRAULIC
BACK TENSION
SPEED: 0-50 FPM (0-15m/MIN.)

LEVELER FEEDER:
TYPE: ROLLER LEVELER-FEEDER
ROLL SIZE: 6" (152mm) DIA. x 21" (533mm) WIDTH
3 HP, 230/460 VOLTS, 1115 RPM,
9.8/4.9 AMPS, 3 PH., 60 HZ. INTO
FALK GEARBOX W/32.04 TO 1 RATIO

ENTRY BILLY ROLL: WITH SPEED COUNTER
ENTRY AND EXIT WIPERS

ROLL COOLANT SPRAY SYSTEM
NOTE: TANK IS NOT SALVAGEABLE - MUST BE REPLACED BY PURCHASER

ROLL DIAMETERS:
WORK ROLL: 1.578" (40mm)
1ST INTERMEDIATE: 2.812" (72mm)
2ND INTERMEDIATE: 5.031" (128mm)
BACKING BEARING: 8.858" (225mm)

EDGE GUIDES: MANUAL AND AUTOMATIC
PRESSURE BOARDS AND WIPERS

THICKNESS GAUGES:
MANUFACTURER: VOLLMER
MODEL No.: VMF 3/22
QUANTITY: 2 - ONE ON EACH SIDE OF THE MILL.

HYDRAULIC SCREWDOWNS

MAIN MILL DRIVE:
250 HP, 650/1850 RPM, 500 VOLTS, 400 AMPS,
G.E. D.C. S/N BD-2-80, MODEL 5CD25D26C506223

WINDERS:
TYPE: EXPANDING MANDREL
TYPE OF EXPANSION: MANUAL
DRUM SIZE: 20" (508mm) DIA. x 22" (558mm) WIDTH
MAX. COIL O.D.: 46.5" (1180mm)
MAX. COIL WEIGHT: 7,600 LBS. (3450 KG)
WINDER DRIVES: 250 HP, 650/1465 RPM, 500 VOLT,
400 AMPS, D.C. INTO FARREL GEARBOX
MODEL FS18, RATIO 7.66/1

COIL SPOOLERS: 60 HP, 500 VOLTS, 98 AMPS, 650/2100 RPM
INTO A D.O. JAMES GEARBOX W/14 TO 1 RATIO,
NEW 1996, S/N 259215

REWINDER: 15"/16" I.D. x 21" WIDE
HYDRAULIC PUSHOFF COIL CAR
COIL WEIGHT: 7,600 LBS. (3450 KG)
RECOILER DRIVE: 25 HP, 240 VOLTS, 650/2000 RPM,
86 AMPS, G.E. D.C.

ELECTRICAL CONTROLS:
G.E. FANUC SCR THYRISTOR CONTROLS ON PAYOFF AND REWINDER
MOTOR GENERATOR ON ALL OTHER COMPONENTS

FLOOR SPACE REQUIRED: 56 FT. W. x 19 FT. DEEP (17m W. x 5.8m DEEP)

DATE MILL CEASED OPERATION 2007

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**