8" X 4" FENN 5 IN 1 WIRE SHAPING LINE (10380)

MACHINE 10380

SPECIFICATIONS

MANUFACTURER FENN MANUFACTURING

TYPE "5 IN 1" WIRE FLATTENING/SHAPING LINE
-TURKSHEAD AND CAPSTAN MOUNTED ON COMMON BASE
ATTACHED TO MILL

LINE CONSISTS OF THE FOLLOWING;

(1) FENN MODEL 2 HI ROLLING MILL
-ROLL
-DIAMETER 8 (203.2mm)
-ROLL FACE 4" (100.4mm)
-MATERIAL STEEL (ALSO SPARE SET OF CARBIDE ROLLS)
-TYPE WATER COOLED
-COLUMN SIZE 5 7/8" X 6 1/4" (150mm x 159mm)
-WINDOW OPENING 8 3/4" (222.25mm)
-BEARINGS ROLLER
-BEARING LUBE FORCED OIL
-DRIVE JOINTS 2 3/16" (55.6mm) SQUARE TYPE
-DRIVE MOTOR 75 HP GENERAL ELECTRIC INDUCTION MOTOR
208-220/440 VOLTS, 50/60 HZ, 3 PH, 1770 RPM
@ 60 HZ, 1475 RPM @ 50 HZ, 183/91.5 AMPS @ 60 HZ
193/96.5 AMPS @50 HZ
GENERAL ELECTRIC KINATROL EDDY CURRENT COUPLING
TORQUE 227.6 LB FT, SPEED RANGE 1730 TO 100 RPM
7.55 AMPS, MODEL 5EC488CO2GO341, S/N CD41-74
-REDUCER NONE- MOTOR IS DIRECTLY COUPLED TO PINION STAND
-SCREWDOWNS MANUAL

MILL IS EQUIPPED WITH ADJUSTABLE ENTRY TABLE AND GUIDES AS WELL AS A SINGLE
PLANE 5 ROLL (1 3/8" (35mm) DIAMETER ROLLS) STRAIGHTENER

(1) MODEL 4U STANDARD SPEED TURKSHEAD

(1) DOUBLE CAPSTAN
-CAPSTAN SIZE
-DIAMETER 16" (406.4mm)
-FACE WIDTH 3" (76.2mm)CONSISTING OF 4 FLAT GROOVES
EACH .625" (16mm) WIDE

CAPSTAN UNIT IS CHAIN DRIVEN FROM MILL. TENSION IS CONTROLLED VIA A WITCHITA
TUBE DISC CLUTCH.

(1) 2000 LB TRAVERSING TAKE UP REEL (PROBABLY A MODEL 2312)
-CAPACITY 2,000 LBS (909 kilos)
-TYPE HYDRAULIC TRAVERSE LIMIT SWITCH CONTROLLED

REEL USES AN INTERNAL VICKERS VARIABLE DELIVERY PUMP TO CONTROL TRAVERSE
SPEED WHILE THE SHAFT IS ROTATING AND A SUPERCHARGER PUMP UNIT TO MAINTAIN
SYSTEM PRESSURE FOR MANUAL TRAVERSE WHILE SHAFT IS AT REST
-SUPERCHARGER PUMP 3/4 HP 1725 RPM

-GUIDE ROLL
-DIAMETER 6" (152.4mm)
-FACE WIDTH 1-1/2" (38.1)
-GROOVES 2 GROOVES

-DRIVE DRIVEN FROM MILL

(1) COLLAPSIBLE DRUM
-FLANGE DIAMETER 34" (863.6mm)
-DRUM I.D. 14" (355.6mm)
-FACE WIDTH 6 1/4" (158.75mm)

**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**