10" x 10" WATERBURY FARREL 2-HI ROLLING MILL (10281)

MACHINE #10281

SPECIFICATIONS:
MANUFACTURER: WATERBURY FARREL, U S A
TYPE MILL: 2HI/4HI HOT/COLD REVERSING MILL

WORK ROLL SIZE: 2-7/8" x 10" (ROLLS & CHOCKS NOT INCLUDED)
-SET UP IN 2 HI CONDITION
BACKUP ROLL SIZE: 10" x 10" (254mm x 245mm)

ROLL BEARINGS: ROLLER BEARING
-CHOCKS PIPED FOR WATER COOLING IF MILL IS
TO BE USED AS HOT MILL
-BEARING LUBE: GREASE

SPINDLES AND COUPLINGS: UNIVERSAL

DRIVEN ROLLS: BACKUP ROLL DRIVEN MILL

MILL SPEED: APPROXIMATELY 0/50/150 FPM

DRIVE MOTOR: 50 HP, 230 VOLT, 175 AMP, 650/1800 RPM
3.42/.90 FLD AMPS, 54.5 FLD OHMS,
GENERAL ELECTRIC D.C. VARIABLE SPEED,
MODEL 5CD 505E144, S/N NTI-34

SCREWDOWNS: POWERED (2) 1-1/2 HP GEAR MOTORS
RATE OF SPEED: .216" PER MINUTE (5.5mm PER MIN.)

ROLL LIFTER: (1) HYDRAULIC CYLINDER (HYD PWR UNIT NOT INCL)

GEAR REDUCER: PHILADELPHIA, SIZE 3218-13, S/N 33382,
RATIO 33.1, HP RATING 50 HP, INPUT
RPM 650/1800, OUTPUT RPM 16.6/46.2 W/
2 HP, 1155 RPM, 220/440 RPM FORCED
LUBRICATION SYSTEM
COMBINATION PINION STAND GEARBOX

MILL SEPARATION FORCE: 500,000 POUNDS (226,796 KG)

PREVIOUS USAGE:
THICKNESS RANGE: 0.125" TO 0.002" (3.175mm TO 0.05mm)
MATERIALS: MOLY & TUNGSTEN
STRIP WIDTH RANGE: 8" TO 4" (204mm TO 101mm)
STRIP SPEED (APPROX.): 45 TO 120 FPM (14m TO 37.5m PER MIN.)

WILL FIT IN ONE TWENTY FOOT OPEN TOP CONTAINER

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**