26" x 4 1/2", RUESCH SLITTING LINE (10272)

MACHINE #10272

SPECIFICATIONS:
MANUFACTURER: RUESCH MACHINE CO. (U.S.A.)
SERIAL No.: N3011 6280
CAPACITY (BASED ON PRIOR USE):
LINE SPEED: 0 - 500 FPM (0 - 127m/MIN.)
THICKNESS RANGE (BRASS): 0.025" - 0.153" (0.6mm - 3.8mm)
MAXIMUM WIDTH OF STRIP: 25" (635mm)
MAXIMUM COIL O.D.: 60" (1525mm)
MAXIMUM COIL WEIGHT: 15,000 LBS. (6800 KG)

LINE CONSISTS OF:

ENTRY COIL CAR: 18" x 34" (457mm x 865mm)
BED SIZE:
BED LINING: NEOPRENE
RIDES ON RAILS TO PAY-OFF

PAYOFF:
MANUFACTURER: RUESCH
TYPE: EXPANDING MANDREL
TYPE OF EXPANSION: HYDRAULIC
I.D. EXPANSION RANGE: 16"/20" (406mm/508mm)
18"/22" (457mm/866mm) WITH EXTENDERS
SLIDING BASE
PAPER UNWINDER
HYDRAULIC SNUBBER HOLDDOWN ROLL

ENTRY FEED TABLE:
TYPE: NEOPRENE
SIZE: 20" (508mm) W. x 60" (1524mm) L.

SLITTER HEAD:
ARBOR DIAMETER: 4 1/8" (105mm)
ARBOR LENGTH: 30" (762mm)
DRIVEN ENTRY PINCH ROLLS: 5" (127mm) DIA. x 30" (762mm) W.
ENTRY SIDE GUIDES: MANUAL
EDGE GUIDE SYSTEM: NORTH AMERICAN MFG. CO.
DRIVE MOTOR: 1.5 HP, 1750 RPM, 180 VOLT
ELECTRICAL CONTROLS: SCR THYRISTOR BY W.E.R. INDUSTRIAL WITH
SAFTRONICS SOLID STATE D.C. DRIVE
KNIFE SIZE: 4 1/8" (108mm) I.D. x 8" (203mm) O.D.
SPACER SIZE: 4 1/8" (108mm) I.D. x 5 1/4" (133mm) O.D.
EXIT PINCH ROLLS: 4" (102mm) x 29 1/2" (750mm)

EXIT TABLE:
TYPE: NEOPRENE
SIZE: 29" (736mm) W. x 102" (2590mm) L.

SCRAP WINDERS:
QUANTITY: 2 (MOUNTED ON A COMMON DRIVE)
DRIVE MOTOR: 2 HP, 1725 RPM, 208/230 V, 3 PH, 60 HZ

RECOILER:
TYPE: EXPANDING MANDREL
TYPE EXPANSION: HYDRAULIC
MANDREL SIZES (TWO DRUM SIZES):
SMALLER SIZE - QTY. 1: 16"/16 1/2" (406mm/420mm) I.D.
x 40" (102mm) WIDE
LARGER SIZE - QTY. 2: 20"/20 1/2" (508mm/520mm) I.D.
x 40" (102mm) WIDE
DRIVE MOTOR: 50 HP, 500/2000 RPM, 500 ARM VOLTS,
88 FLD AMPS, INTO 2-SPEED GEARBOX
WITH DUAL RATIOS 8.39/16.78
EQUIPPED WITH HYDRAULIC COIL PUSH-OFF

SINGLE ARM TURNSTILE:
FOR REMOVAL OF COIL FROM RECOILER
HYDRAULIC PUSH-OFF
360 DEGREE SWING

RUESCH COIL CAR FOR COIL DISCHARGE

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**