ZR33-13 WATERBURY FARREL SENDZIMIR REVERSING COLD ROLLING MILL (10243)

MACHINE #10243

SPECIFICATIONS:
MANUFACTURER: WATERBURY FARREL COMPANY
TYPE: SENDZIMIR 20-HI COLD ROLLING MILL
MODEL: ZR33-13
S/N: 248873
MAXIMUM STRIP WIDTH: 14.250" (360mm)
ROLLING SPEEDS: 350/500 FPM (106-225 m/MIN.)
MATERIAL THICKNESS RANGE: 0.090" (2.286mm) TO 0.003" (0.0762mm)
MAX WINDING TENSION: 3960 LBS. TO 500 FPM (1796 KG @ 225 m/MIN.)
MAX WINDING TENSION: 5000 LBS. TO 330 FPM (2720 KG @ 100 m/MIN.)
MIN WINDING TENSION: 750 LBS. (340 KG)
FORCE ON WORK ROLL
@ PSI OIL PRESSURE: 48,200 LBS. (21,863 KG)

WORK ROLL (NOM. DIA.): 1.125" (28.57mm)
1ST INTER. ROLL (NOM. DIA.): 2.062" (52.37mm)
2ND INTER. ROLL (NOM. DIA.)
- DRIVE: 3.600" (91.44mm)
- IDLER: 3.600" (91.44mm)
BACKING BEARING DIA.: 6.299" (160mm)
BACKING BEARING WIDTH: 3.543" (90mm)
BACKING BEARING (QUAN. REQ.): 24
DEFLECTOR ROLL-STEEL ROLL:
- DIA.: 10" (254mm)
- FACE: 16" (406mm)
STRIP WIPERS:
- TYPE: SINGLE FRAME DOUBLE WIPER
- OPERATION: HYDRAULIC
- CONTROL: MANUAL VALVES ON CONTROL PANEL
SIDE GUIDES:
- ROLLER TYPE: MANUALLY OPERATED
PRESSURE BOARD:
- OPERATION: HYDRAULIC
- CONTROL: MANUAL VALVES ON CONTROL PANEL

LINE CONSISTS OF:
UNCOILER:
TYPE: EXPANDING MANDREL
MANDREL SIZE: 12"/16" (305mm/406mm) I.D.
x 16" (406mm) WIDE
EQUIPPED WITH:
-SNUBBER TAIL HOLDDOWN
-COIL CAR

HYDRAULIC ENTRY PINCH ROLLS w/EDGE GUIDE

REVERSING WINDERS (2):
TYPE: SOLID BLOCK
BLOCK SIZE: 16" (406mm) DIA. x 16" (406mm) FACE
DRIVE MOTOR: 50 HP, 400/1600 RPM, 120 AMP, 240 V
GEAR REDUCER: HORSBURGH & SCOTT, GEAR RATIO 12.9 TO 1
MAX. COIL DIA.: 39" (990mm)
MAX. COIL WEIGHT: 3900 LBS. (1770 KG)

MILL MAIN DRIVE: 125 HP, 850/1800 RPM, 240 V, 424 AMP,
120 FLD. VOLTS, 11.4 FLD. AMPS,
SCHULZ D.C. DRIVE
GEAR REDUCER: PHILADELPHIA, GEAR RATIO 3.37 TO 1

REWINDER:
MANUFACTURER: WATERBURY FARREL CORP.
TYPE: EXPANDING MANDREL
TYPE EXPANSION: HYDRAULIC
MANDREL SIZE: 14"/16" (355mm/406mm)
x 14" (355mm) FACE
EQUIPPED WITH:
-COIL CAR

PINION STAND LUBRICATION SYSTEM:
LUBRICATION TANK CAPACITY: 50 GAL. (130 LITERS)
SYSTEM CAPACITY: 15 GPM (57 L/MIN.)
OIL: APPROX. 750 SSU @ 100 DEG. F.

MILL HYDRAULIC SYSTEM (SCREWDOWN, PRESSURE BOARDS, AND WIPERS):
TANK CAPACITY: SAME TANK AS AUX. HYD.
DUAL PUMP DRIVEN BY 3 HP, 1200 RPM MOTOR
LARGE VOLUME PUMP (@ 500 PSI): 3.4 GPM (12.9 L/MIN.)
SMALL VOLUME PUMP (@ 1000 PSI): 2 GPM (7.5 L/MIN.)

AUXILIARY HYDRAULIC SYSTEM:
TANK CAPACITY: 200 GAL. (757 LITERS)
DUAL PUMP DRIVEN BY 7-1/2 HP, 1200 RPM MOTOR
LARGE VOLUME PUMP (@ 500 PSI): 12 GPM (45 L/MIN.)
SMALL VOLUME PUMP (@ 750 PSI): 5 GPM (19 L/MIN.)

THICKNESS GAUGES AND ELECTRICAL CONTROLS TO BE SUPPLIED BY PURCHASER

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**