6" x 18" x 24" GRISET 2/4-HI ROLLING MILL (10235)

MACHINE #10235

SPECIFICATIONS:

MANUFACTURER: GRISET (FRANCE)

TYPE: COMBINATION;
2-HI MILL FOR BREAKDOWN ROLLING
4-HI MILL FOR FINISH ROLLING

MAXIMUM STRIP WIDTH: 21.5" (546mm)

THICKNESS RANGE (BRASS):
2-HI MODE: 0.80"- 0.08" (20mm - 2mm)
4-HI MODE: 0.160"- 0.025" ( 4mm - 0.6mm)

SPEED RANGE:
2-HI MODE: 0-270 FPM (0- 82m/MIN.)
4-HI MODE: 0-820 FPM (0-250m/MIN.)

ROLL SIZE (DIAMETER x WIDTH):
2-HI MODE: 18" x 24" (457mm x 610mm)
4-HI WORK ROLL: 6" x 24" (150mm x 610mm)
4-HI BACKUP ROLL: 18" x 24" (457mm x 610mm)

EQUIPPED WITH:
HYDRAULIC ROLL POSITION
HYDRAULIC SCREWDOWNS
AUTOMATIC GAUGE CONTROL SYSTEM (AGC)
VOLLMER CONTACT GAUGES
SCR DRIVES (NEW 1995)
STRIP WIPERS
CUTOFF SHEAR

LINE CONSISTS OF:
ENTRY COIL STORAGE RACKS
ENTRY COIL CAR
COIL PAYOFF WITH HYDRAULIC SNUBBER, HYDRAULIC DRIVE, STRIP
CENTERING DEVICE, HYDRAULIC FELT PAD, BRAKE FOR BACK TENSION.

REVERSING WINDERS:
TYPE: EXPANDING MANDREL
MANDREL O.D.: 20" (508mm)
MANDREL WIDTH: 24" (610mm)
TYPE EXPANSION: HYDRAULIC
TYPE OF COIL PUSHOFF: HYDRAULIC
MANUFACTURER: WECO
DRIVE MOTOR: 120 KW, 511-440-440 V, 430-300-300 AMP

REVERSING WINDERS:
MANDREL O.D.: 78" (2000mm) DIA. x 20" (508mm) FACE

MAIN DRIVE MOTOR: 582 KW, 440 V, 1423 AMP, 858 RPM,
HELMKE MOTORS, MODEL GL MOT,
S/N 5219/93/1, TYPE GMV-IN-355KM7/44

MAIN DRIVE GEARBOX: HORSBURGH & SCOTT SIZE 250-D TS
MARK II HELICAL SPEED REDUCER,
HP RATING 788, INPUT RPM 870/2110,
S/N P3357
GEAR RATIO (4-HI MODE)-9.453/1
GEAR RATIO (2-HI MODE)-30.176/1
MILL IS FULLY OPERATIONAL.
CEASED PRODUCTION IN JULY 2006.
PURCHASER MUST SUPPLY REPLACEMENT UPCOILER.

*PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE.*

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER.**