FENN MODEL 51P POWER DRIVEN TURKSHEAD WIRE SHAPING LINE (10231)

MACHINE #10231

SPECIFICATIONS

MANUFACTURER: FENN MANUFACTURING COMPANY

MODEL: 51P

TYPE: POWER TURKSHEAD WIRE SHAPING LINE

LINE CONSISTS OF THE FOLLOWING:

MODEL 51P POWER DRIVEN TURKSHEAD
-TYPE: "TH" STYLE COMBINATION TURKSHEAD

-ROLLS
-DIAMETER: 5" (127mm)
-FACE WIDTH: 5/8" (16mm)
-DRIVEN ROLLS: UPPER AND LOWER ROLLS DRIVEN

-DRIVE SPINDLES: 1" (25mm) DIAMETER

-DRIVE MOTOR: 25 HP (18.6kw) 1165 RPM AC MOTOR
230/460 VOLT

-MOTOR SPEED REGULATION: G.E. EDDY CURRENT COUPLING
-25 HP (18.6kw)
-225 TO 1075 RPM OUTPUT RANGE
-122 FT/LBS CAPACITY

NOTE: FURTHER MOTOR SPEED REDUCTION OF APPROXIMATELY 1.4:1 TAKES PLACE VIA
THE BELT DRIVE BETWEEN THE MOTOR/EDDY CURRENT COUPLING AND THE PINION STAND.

-PINION STAND: HORSBURGH & SCOTT PINION STAND ONLY
-SIZE 6
-MODEL W-46
-RATIO 1:1
-INPUT RPM 1075
-S/F 1.0
-S/N L1642

-DRIVE: GE SPECIAL PURPOSE SP-200 EDDY CURRENT DRIVE
-230 VOLT 3 PHASE

THE BASE FOR THE TURKSHEAD INCLUDES AN ADJUSTABLE TURKSHEAD MOUNT AND HOUSING
THE INTERNAL COOLANT TANK.

MODEL 1210 HYDRAULIC TRAVERSING TAKE UP REEL

-TYPE: HYDRAULIC TRAVERSE

-CAPACITY: 1000 LBS (454k)
-MAX TENSION: 200 LBS (91k)
-MAXIMUM TRAVERSE: 10" (254mm)

-DRIVE FLANGE SIZE: 9" (228.6mm) WITH DRIVE PIN

-COLLAPSIBLE DRUM:
-FLANGE DIAMETER: 32" (812.8mm)
-MANDREL DIAMETER: 16" (406.4mm)
-FACE WIDTH: 6" (152.4mm)

TRAVERSING REEL IS EQUIPPED WITH AN ON BOARD HYDRAULIC PUMP DRIVEN OFF THE
MAIN DRIVE SHAFT FOR TRAVERSE CONTROL AND A 1 HP 1140 RPM MOTOR DRIVEN SUPER
CHARGER PUMP FOR MAINTAINING SYSTEM PRESSURE FOR TRAVERSE WHILE THE MAIN SHAFT
IS IDLE. THE FRAME FOR THE UNIT HOUSE THE HYDRAULIC TANK.

ALSO INCLUDED ON THE REEL IS A HYDRAULICALLY TRAVERSING GUIDE ROLL UNIT TO
TRAVERSE WIND FINE WIRE. WHEN USING THIS FEATURE, THE DRUM OR WIRE CARRIER
WOULD NOT TRAVERSE.

-DRIVE MOTOR: LOUIS ALLIS 7.5 HP (5.6kw) 1750 RPM AC
230/460 VOLT

-MOTOR SPEED REGULATION: ADJUSTO SPEDE EDDY CURRENT MOTOR COUPLING
90 VOLT CONTROL
S/F 1.15
0 TO 1700 RPM OUTPUT SPEED RANGE

-DRIVE: LOUIS ALLIS MOD7 TYPE MC2 EDDY CURRENT DRIVE
CONTROLLER

**PRICE QUOTED IS EX-WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**