8" x 2-1/2" FENN 3 STAND TANDEM WIRE FLATTENING MILL (10056)

MACHINE # 10056

GENERAL SPECIFICATIONS:
MANUFACTURER: FENN MANUFACTURING CO.
TYPE: 3 STAND TANDEM WIRE FLATTENING MILL
w/TRAVERSING TAKE-UP
PAYOFF:
TYPE: HORIZONTAL
DRUM SIZE: 16" I.D. x 32" O.D. x 5" FACE
(406mm x 812mm x 127mm Face)
DRAG BRAKE FOR
NORMAL & EMERGENCY STOP: 1-1/2 HP, 1800 RPM, 110 VOLT, 60 HZ
EDDY CURRENT AIR COOLED DRAG BRAKE
w/4-3/16 TO 1 GEARBOX RATIO
BRAKE FOR
HOLDING BACK TENSION: WARNER ELECTRIC BRAKE

ENTRY ROLL STRAIGHTENER:
TYPE: 10 ROLL TWO PLANE, NON-DRIVEN

ROLL STAND No. 1:
MODEL No.: 082
ROLL SIZE: 8" (203mm) DIA. x 2-1/2" (63.5mm) FACE
CARBIDE SHELL [ACTUAL ROLL FACE 5" (127mm)]
ROLL BEARINGS: ROLLER
MILL STAND CROSS SECTION: 5" (127mm) x 5-1/2" (140mm)
WINDOW WIDTH: 7-1/2" (190mm)
ROLL WIPER
SCREWDOWN: POWERED
SCREWDOWN MOTOR: 1/2 HP, 140 RPM, 440 VOLT, 60 HZ, 3 PH.
MILL DRIVE MOTOR: 75 HP, 240 VOLT, 255 AMPS, 500/1690 RPM
G.E. VARIABLE SPEED
GEARBOX RATIO: 1.785 TO 1
AUTOMATIC LUBRICATION
DANCER ROLL SPEED CONTROLS

EDGE ROLLS:
TYPE: FRICTION DRIVEN w/POWERED ADJUSTMENT
1/2 HP, 1800 RPM, 440 V, 60 HZ, 3 PH.

ROLL STAND No. 2:
MODEL No.: 062
ROLL SIZE: 6" (152mm) DIA. x 2-1/2" (63.5mm)
FACE CARBIDE SHELL
ROLL BEARINGS: ROLLER
MILL STAND CROSS SECTION: 5" (127mm) x 5-1/2" (140mm)
WINDOW WIDTH: 7-1/2" (190mm)
ROLL WIPER
SCREWDOWN: POWERED
SCREWDOWN MOTOR: 1/2 HP, 140 RPM, 440 V, 60 HZ, 3 PH.
MILL DRIVE MOTOR: 75 HP, 240 V, 255 AMPS, 500/2000 RPM,
G.E. VARIABLE SPEED
DANCER ROLL SPEED CONTROLS

EDGE ROLLS:
TYPE: FRICTION DRIVEN w/POWERED ADJUSTMENT
1/2 HP, 1800 RPM, 440 V, 60 HZ, 3 PH.

ROLL STAND No. 3:
MODEL No.: 062
ROLL SIZE: 6" (152mm) DIA. x 2-1/2" (63.5mm) FACE
CARBIDE SHELL
ROLL BEARINGS: ROLLER
MILL STAND CROSS SECTION: 5" (127mm) x 5-1/2" (140mm)
WINDOW WIDTH: 7-1/2" (190mm)
ROLL WIPER
SCREWDOWN: POWERED
SCREWDOWN MOTOR: 1/2 HP, 140 RPM, 440 V, 60 HZ, 3 PH.
MILL DRIVE MOTOR: 75 HP, 240 V, 255 AMPS, 500/2000 RPM,
G.E. VARIABLE SPEED
EXIT WIPER UNIT

FLOOR MOUNTED 3 ROLL DANCER SPEED CONTROL
10 - 100 LB. (4.5 - 45 KG) BACK TENSION

TAKE-UP REEL:
MANUFACTURER: FENN MANUFACTURING
TYPE: HORIZONTAL TRAVERSING
TYPE OF TRAVERSE: HYDRAULIC
CAPACITY: 2,000 LBS.
SPOOL CAPACITY: 16" I.D. x 32" O.D. x 5" FACE (TRAVERSE)
(407mm I.D. x 812mm O.D. x 127mm Face)
DRIVE MOTOR: 15 HP, 500/2000 RPM, 240 V, w/2.64 TO 1 RATIO
HYDRAULIC TRAVERSE MOTOR: 3/4 HP, 1800 RPM, 440 V, 60 HZ, 3 PH

MILL SPEED: 3100 FPM (969 METERS PER MINUTE) MAXIMUM

MILL DIMENSIONS:
3 STAND MAIN BODY: 19 FT. 10" LONG x 6 FT. WIDE x 92" HIGH
(6m Long x 1.8m Wide x 2.4m High)
PASS LINE HEIGHT OF WIRE: 41" (1040mm) ABOVE FLOOR LINE

PURCHASER TO SUPPLY NEW ELECTRICAL CONTROLS AND WIDTH & THICKNESS GAUGES.

**PRICE QUOTED IS EX WORKS AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**