BWE CONFORM WIRE EXTRUSION MACHINE (8185)

GENERAL SPECIFICATIONS:

MANUFACTURER: BWE LTD., UNITED KINGDOM
MODEL No.: 225 CONFORM
TYPE: CONTINUOUS WIRE ROD EXTRUSION PRESS
FOR SOLIDS, TUBES, AND SHAPES.
PREVIOUS USE:
-START SIZE 8MM (.315") & 13MM (.512")
-FINISH SECTION: "T" SECTION
-MATERIAL COPPER

RATED POWER: 90 KW
POWER SOURCE: 480 V, 3 PH, 60 HZ
WHEEL DIAMETER: 11.22" (28.5mm)
DRIVE MOTOR: 125 HP, 850/1500 RPM, 500 VOLTS D.C.
INTO BREVINI GEARBOX w/28 TO 1 RATIO
LAST IN OPERATION: 2003

This is designed particularly for small copper sections (ETP or OF) and uses
rod feed between 8mm and 13mm diameter. The Maximum yield strength is 140Mpa
which really eliminates all but the most soft brass.

The product size minimum is 4mm2 (8mm feed) or 15mm2 (12.4mm feed) with a
maximum product dimension of 28mm. Maximum cross section area is 120mm2.

Output rates vary with rod size and also product size but are typically
340kg/hr(8mm) and 800kg/hr(12.4mm).

* * * * ALL SPECIFICATIONS ARE SUBJECT TO BUYER'S VERIFICATION * * * *