5 STAND FENN TANDEM WIRE FLATTENING W/POWER DRIVEN TURKSHEAD (8059)

GENERAL SPECIFICATIONS

MANUFACTURER FENN MANUFACTURING COMPANY

TYPE 5 STAND TANDEM WIRE FLATTENING LINE WITH
POWER DRIVEN TURKSHEAD

PREVIOUS USE
-MATERIAL 85/15 BRASS

LINE SPEED 650 FEET PER MINUTE (200 M/MIN.)

LINE DIRECTION LEFT TO RIGHT

VOLTAGE 460/230 VOLT 3 PHASE 50/60 HERTZ

LINE CONSISTS OF THE FOLLOWING:

ONE (1) TWO PLANE 14 ROLL FRICTION STRAIGHTENER
-7 ROLLS EACH PLANE
-QUICK OPENING CAM FOR EASY STRING UP
-WIRE GUIDE ROLLER AT ENTRY

ONE (1) MODEL 102TH POWER DRIVEN TURKSHEAD
-TYPE "TH" COMBINATION TYPE TURKSHEAD SETUP
-SUITABLE FOR SHAPES AS WELL AS
SQUARES AND RECTANGLE

-ROLL SIZE
-DIAMETER 10 1/2" (265 MM)
-FACE WIDTH 1 3/4" (4.4 MM)

-DRIVEN ROLLS UPPER AND LOWER ROLLS DRIVEN

-DRIVE MOTOR 50 HP 1750/2100 RPM DC WITH BLOWER
-500 VOLT
-84.3 AMPS

-PINION STAND/REDUCER D.O. JAMES MODEL SA-72-10PR
-11.68 TO 1 RATIO
-1.0 SF

-SCREWDOWN MOTORS 1/2 HP 1725 RPM AC
-SCREWDOWN GEARBOXES WORM GEAR TYPE
-500 TO 1 RATIO

TURSKHEAD IS EQUIPPED WITH POWER SCREWDOWNS FOR ADJUSTMENT OF WIDTH
AND THICKNESS OF MATERIAL. SCREWDOWN SPEED IS AT A RATE OF .263" PER
MINUTE. TURKSHEAD IS MOUNTED ON A WELDED STEEL BASE WITH COOLANT
DRAINAGE CONNECTION.

ONE (1) MODEL 124 ROLLING MILL
-TYPE 2 HI SET UP

-ROLL SIZE
-DIAMETER 12" (305 MM)
-FACE WIDTH 6" (152 MM)

-ROLL MATERIAL HARDENED TOOL STEEL

-BEARING TYPE HEAVY DUTY FENN ROLLER BEARINGS

-SEPARATING FORCE 150,000 LBS (68,040 KG)

-SCREWDOWNS ELECTRO-MECHANICAL
-WITH DIGITAL READOUT INDICATING UPPER
ROLL POSITION

DRIVE MOTOR 50 HP 1750/2100 RPM DC WITH BLOWER
-500 VOLT
-84.3 AMPS

PINIO STAND/REDUCER D.O. JAMES MODEL SCA-72-12PR
-11.83 TO 1 RATIO
-1.0 SF

MILL IS EQUIPPED WITH ENTRY TABLES WITH SIDE GUIDES AND WEAR PLATES,
ROLL REMOVAL UNIT (RAIL TYPE SYSTEM WITH TRAVERSE SCREW/HANDWHEEL
ASSY), FORCE FEED OIL LUBRICATION SYSTEM FOR BEARINGS AND ROLL WIPER
ASSEMBLY. MILL IS MOUNTED ON WELDED STEEL BASE WITH COOLANT DRAINAGE
CONNECTION.

ONE (1) MODEL 61 3/4 POWER DRIVEN EDGER
-TYPE FLOOR MOUNTED- DRIVEN

-ROLL SIZE
-DIAMETER 6" (152 MM)
-FACE WIDTH 1 3/4" (44.5 MM)

-ROLL MATERIAL HARDENED TOOL STEEL

-DRIVE MOTOR 15 HP 1750/2100 RPM DC WITH BLOWER
-500 VOLT
-26.7 AMPS

-REDUCER D.O. JAMES MODEL H121
-SINGLE INPUT/SINGLE OUTPUT TYPE

EDGER IS EQUIPPED WITH POWER ROLL POSITION ADJUSTMENT TO ADJUST ROLLS
AS A COUPLE OR INDEPENDENTLY USING A .33 HP 1145 RPM MOTOR AND WORM
GEAR WITH DIGITAL READOUT. BOTH EDGER ROLLS ARE DRIVEN. EDGER IS
EQUIPPED WITH AN OIL MIST LUBE SYSTEM FOR BEARING LUBRICATION AS
WELL AS COOLANT NOZZLES.

FIVE (5) MODEL 10L MODIFIED FLOOR MOUNTER DANCERS
-TYPE TWO FIXED ROLLS W/MOVABLE ARM ROLL
-ARM DANCES DOWN FOR SUBMERGENCE OF WIRE
IN COOLANT TANK WHILE IN OPERATION

-ROLL SIZE
-DIAMETER 10" (254 MM)

-FEED BACK UNIT VOLTRONICS DANCER POTENTIOMETER ASSY

DANCER IS A TANK TYPE TO CONTAIN SUFFICIENT COOLANT AS TO ALLOW FOR
THE WIRE TO BE SUBMERGED DURING OPERATION FOR COOLING. UNIT UTILIZES A
REMOVABLE PLEXIGLASS WINDOW FOR EASE OF THREADING AND FOR OBSERVATION
WHILE RUNNING.

FOUR (4) MODEL 084 ROLLING MILLS
-TYPE 2 HI SET UP

-ROLL SIZE
-DIAMETER 8" (203 MM)
-FACE WIDTH 4" (101 MM)

-ROLL MATERIAL HARDENED CARBIDE SHELLS ON ARBORS

-BEARING TYPE HEAVY DUTY FENN ROLLER BEARINGS

-SEPARATING FORCE 60,000 LBS (27,216 KG)

-SCREWDOWNS ELECTRO-MECHANICAL
-WITH DIGITAL READOUT INDICATING UPPER
ROLL POSITION

-DRIVE MOTORS 1ST STAND
-50 HP 1750/2100 RPM DC WITH BLOWER
-500 VOLT 84.3 AMPS
2ND, 3RD AND 4TH STANDS
-25 HP 1750/2100 RPM DC WITH BLOWER
-500 VOLT
-43.5 AMPS

-PINION STAND/REDUCER ALL STANDS
-D.O JAMES MODEL SA-51-8PR
-1.0 SF
-RATIOS
-1ST STAND 6.42 TO 1
-2ND STAND 6.35 TO 1
-3RD STAND 5.45 TO 1
-4TH STAND 5.45 TO 1

MILL IS EQUIPPED WITH ENTRY TABLES WITH SIDE GUIDES AND WEAR PLATES,
ROLL REMOVAL UNIT, FORCED OIL LUBRICATION SYSTEM FOR BEARINGS AND ROLL
WIPER ASSEMBLY. MILL IS MOUNTED ON WELDED STEEL BASE WITH COOLANT
DRAINAGE CONNECTION.

ALL FOUR MODEL 084 MILL ARE EQUIPPED WITH FRICTION TYPE EDGERS WHICH
ARE MANUALLY ADJUSTED.

ONE (1) FLOOR MOUNTED DANCER
-TYPE SINGLE PASS DANCER-AIR COOLED

DANCER UTILIZES TWO FIXED POSITION SHEAVES AND ONE MOVABLE SHEAVE
CONTROLLED BY AN AIR CYLINDER.

ONE (1) MODEL 2315 SVE TRAVERSING TAKE UP REEL
-TYPE BALL SCREW TRAVERSE MICRO-PROCESSOR
CONTROLLED

-COIL WEIGHT 2,000 LBS (900 KG)
-MAX TRAVERSE STROKE 15" (381 MM)
-MAX TRAVERSE LEAD 1 1/4" (31.75 MM)
-MIN TRAVERSE LEAD 0"
-MAX STOCK TENSION 300 LBS (136 KG)

-SPINDLE DIAMETER 4 1/2" (11.4 MM)

-DRIVE MOTOR 15 HP 1750/2100 RPM DC WITH BLOWER & STERNS
TYPE BRAKE
-500 VOLT
-26 AMPS

-ARBOR AIR EXPANSION
5" DIAMETER

THE TAKE UP REEL IS EQUIPPED WITH A SERVO MOTOR DRIVEN BALL SCREW
TRAVERSE SYSTEM. THE MICRO-COMPUTER TRAVERSE CONTROL SYSTEM RECEIVES
PRECISE DIGITAL INPUT SIGNALS OF REEL RPM AND TRAVERSE POSITION FROM
TRANSDUCERS AS WELL AS INPUT PARAMETER DATA SUCH AS REEL WIDTH, STOCK
WIDTH, END DWELL AND STOCK SPACING THROUGH A NEMATRON TOUCH SCREEN AND
TOUCHPAD TO PRECISELY CONTROL TRAVERSE OPERATIONS.

ALSO INCLUDED IS A STOCK GUIDE ASSEMBLY.

ONE (1) COIL LIFT UNIT
-TYPE AIR OPERATED MOUNT BELOW GROUND LEVEL

ONE (1) GUAGE STAND
-TYPE GAUGES SMT CONTACT WIDTH GAUGE
(NO THICKNESS GAUGE)

ONE (1) SIEMENS SIMORG DC COORDINATED ELECTRICAL DRIVE SYSTEM FOR
VARIABLE SPEED OPERATION IN THE CONSTANT TORQUE RANGE. THE DRIVE
SYSTEM IS PLC CONTROLLED AND INCLUDES MAIN OPERATOR'S CONTROL DESK
AND ISOLATION TRANSFORMERS. READOUTS ARE DISPLAYED IN METRIC.

* * * MACHINE IS SOLD AS IS WHERE IS EX WORKS * * *

* * * ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER * * *