BHS-TORIN MODEL 165C WIRE SHAPUING LINE (7871)

SPECIFICATIONS

MANUFACTURER BHS-TORIN

MODEL 165C

TYPE WIRE SHAPING LINE

CAPACITY
-MAX SQUARE .475" (12mm)
-MAX RECTANGLE .240" X .475" (6mm X 12mm)

LINE SPEED 0 TO 225 FEET PER MINUTE

LINE CONSISTS OF THE FOLLOWING:

(1) PAYOFF UTILIZES DISK BRAKE FOR HOLDING AND BACK TENSION.
9 1/2" DIAMETER FLANGE FOR MOUNTING PAYOFF DRUM.
42" MAXIMUM DRUM DIAMETER
DRUM NOT PROVIDED

(1) MODEL 165C COMBINATION TYPE TURKSHEAD WITH BASE

-ROLL SIZE 6 1/2" (165mm) DIAMETER
1 1/4" (32mm) FACE WIDTH

-"C" (COMBINATION) TYPE TURKSHEADS CAN BE USED AS A UNIVERSAL TYPE OR PLAIN
TYPE TURKSHEAD ALLOWING THE CUSTOMER TO MANUFACTURE SQUARES AND RECTANGLES
AS WELL AS SPECIAL PROFILES.

-TURSHEAD IS MOUNTED ON A WELDED STEEL BASE WITH INTEGRAL COOLANT SYSTEM FOR
PROVIDING COOLANT TO THE PRODUCT AS WELL AS RECOVERY OF COOLANT TO TANK IN
BASE.

-ADJUSTABLE SIDE GUIDES ARE ON THE ENTRY AND EXIT SIDE OF TURKSHEAD.

-COOLANT SYSTEM 1/2 HP GUSHER PUMP

-POWER ADJUST ON UPPER ROLL
-ADJUST MOTOR 3/4 HP 1725 AC MOTOR
-REDUCER CONE DRIVE
-RATIO: 800 TO 1

NOTE: SECOND MOUNTING SURFACE IS PROVIDED ON BASE FOR SMALL TURKSHEAD.

(1) DOUBLE CAPSTAN

-CAPSTANS
-TYPE FIRST CAPSTAN IS GROOVED
-GROOVE WIDTH: 1 3/8"
-GROOVE DEPTH: 1/2"
-CAPSTAN O.D.: 24"
-CAPSTAN WIDTH: 8 1/4"

SECOND CAPSTAN IS FLAT
-CAPSTAN O.D.: 24"
-CAPSTAN WIDTH: 8 1/4"

-REDUCERS CONE DRIVE
-RATIO: 30 TO 1
-INPUT: 1750 RPM MAX
-DRIVE SHEAVE: 13" DIAMETER

-DRIVE MOTOR 40 HP 1750 RPM DC WITH:
-TACH
-BLOWER
-DRIVE SHEAVE: 8" DIAMETER

(1) TRAVERSING TAKE UP REEL

-CAPACITY 1000 LBS

-TRAVERSE TYPE BALL SCREW
-TRAVERSE 12"

-MAIN SHAFT DIAMETER 4 1/2"

-DRIVE SHEAVE 19" DIAMETER

-COLLAPSIBLE DRUM
-MAXIMUM O.D. (FLANGE) 36"
-COIL I.D. 16"

-GUIDE ROLL 4 1/2" DIAMETER
-ADJUSTABLE WITH WIRE GROOVE

-REDUCER DODGE TXM REDUCER
-RATIO: 9.231 TO 1
-189 OUTPUT RPM
-DRIVE SHEAVE: 8" DIAMETER

-DRIVE MOTOR 5 HP 1750 RPM DC WITH:
-TACH
-BLOWER

*******ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER*******