16" x 22" JONES 2-HI BREAKDOWN ROLLING MILL (7256)

SPECIFICATIONS:
MANUFACTURER: GEORGE JONES & CO. (U.K.) LTD.
TYPE: 2-HI BREAKDOWN MILL

ROLL SIZE:
DIAMETER: 16" (406 MM)
ROLL FACE: 22" (560 MM)
ROLL BEARINGS: WHITE METAL

THICKNESS RANGE:
MAXIMUM ENTRY (BRASS): 0.710" (18 MM)
MINIMUM EXIT (BRASS): 0.060" (1.5 MM)

DRIVE MOTOR: 150 HP, 730 RPM, 400 V., 3 PH., 50 HZ.

UPCOILER: 22 KW, 730 RPM, 400 V., 3 PH., 50 HZ.
MANUFACTURER NOBS AG, SWITZERLAND
CAPACITY 7,500 KG (16,500 LBS.)
MAXIMUM WIDTH 750 MM (29.5")
MAXIMUM THICKNESS 20 MM (0.787")
PRESENT SPEED 21 M/MIN. (70 FT./MIN.)

DRIVEN COILING ROLLS 4 x 150 MM DIA.
DRIVEN BENDING ROLL 1 x 150 MM DIA.
BENDING ROLL OPERATION HYDRAULIC
ROLL ADJUSTMENT MANUAL - LINKED
SIDE PLATE ADJUSTMENT MANUAL - LINKED
SIDE PLATE POSITION LOCKS MANUALLY OPERATED
DRIVEN COIL SUPPORT ROLLS 2 x 125 MM DIA.

UPCOILER TRAVERSE (NOT USED) PROVISION IS MADE FOR
MOTORIZED TRAVERSE OF THE COMPLETE
UNIT BY GEARED MOTOR UNIT.

MAIN DRIVE A.C. MOTOR THRU 16 TO 1 REDUCTION GEARBOX
TO SPLITTER BOX & ROLL DRIVE SPINDLES.

MAIN MOTOR 22 KW, 730 RPM, 415 V, 3 PH, 50 HZ

COIL KICK OUT HYDRAULIC
COIL REMOVAL CRADLE HYDRAULIC

ALL DEDICATED HYDRAULIC AND ELECTRICAL CONTROLS INCLUDED

SCREWDOWNS: ELECTROMECHANICAL
SPEED OF MILL: 67 FPM (20 M/MIN.)
APPROXIMATE FLOOR SPACE: 32 FT. ACROSS x 20 FT. DEEP

SPARE ROLLS:
- 1 SET IN MILL
- 1 SET ON PALLET (BELIEVED TO BE SCRAP)
- 1 SET AT MCM WAREHOUSE (BELIEVED TO BE SCRAP)

SPARE COUPLINGS:
- 1 SET

PARTS AT MANUFACTURER WHICH HAVE NOT BEEN PAID FOR AND WHICH COULD
BE PURCHASED SEPARATELY AT ADDITIONAL COST:

- 2 SPARE ROLLS
- 1 HALF BEARING BEING RE-LINED
- 1 SPARE MAIN DRIVE MOTOR BEING REWOUND

MILL IS INSTALLED AND OPERATIONAL

* * * * ALL SPECIFICATIONS ARE SUBJECT TO BUYER'S VERIFICATION * * * *