12" x 10" WATERBURY FARREL 4 STAND TANDEM COLD ROLLING MILL (6317)

MANUFACTURER: WATERBURY FARREL CORP.

TYPE: 4 STAND TANDEM COLD ROLLING MILL
FOR STRIP OR WIRE.

CONFIGURATION: 4 STANDS ARE MOUNTED IN A COMMON BASE. THE
HYDRAULIC DRIVES AND PINION STANDS ARE
MOUNTED ON A SEPARATE PARALLEL COMMON BASE

DRIVE MOTORS: HYDRAULIC MOTORS

ROLLING MILL STANDS
ROLL SIZE 12" DIA. X 10" FACE
MILL STAND CROSS SECTION 5" X 8"
WINDOW WIDTH: 13"
SCREWDOWNS: HYDRAULIC MOTORS
STRIP COOLANT SYSTEM RECIRCULATING SYSTEM INCLUDES PIPING,
DRAINS IN BASE OF MILL, & TANK IN BASE
MILL. PURCHASER TO SUPPLY PUMP AND
FEEDER PIPING
PINION STANDS: HORSBURGH & SCOTT, SIZE 12" X -8154
RATIO 1 TO 1, SERVICE FACTOR 1
1ST STAND 30 HP, INPUT RPM 11, SERIAL #
L-333
2ND STAND 60 HP, INPUT RPM 22, SERIAL #
L-334
3RD STAND 83 HP, INPUT RPM 44, SERIAL #
L-335
4TH STAND (PINION IS MISSING)
DIMENSIONS OF 4 STAND BASE: 60" WIDE x 17 FT. LONG X 8 FT. HIGH
DIMENSIONS OF DRIVE BASE 60" WIDE X 17 FT. LONG X 4 FT. HIGH
DISTANCE BETWEEN STANDS: 21"
ROLL BEARINGS: TIMKEN TAPERED ROLLER BEARING
TYPE TDIT, DOUBLE CONE H-432549TB
SINGLE CUP: H-432510
SPACERS: H-432510EA

NOTE: THIS MILL WAS ORIGINALLY DESIGNED AS A COLD STRIP MILL RUNNING BETWEEN
20 - 268 FPM USING HYDRAULIC DRIVES.

NOTE: IF NEW OWNER WANTS TO CONVERT THIS MILL TO A HIGHER SPEED WIRE
FLATTENING MILL, NEW ELECTRIC DRIVES AND CONTROLS SHOULD REPLACE THE
HYDRAULICS. THERE IS A 21" SPACE BETWEEN STANDS TO ADD EDGE GUIDE ROLLS.

****** ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY THE PURCHASER ******