6" x 16" x 18-1/2" FARMER NORTON 4-HI ROLLING MILL W/AGC (5439)

MANUFACTURER: SIR JAMES FARMER NORTON
DATE OF MANUFACTURE: 1986

WORK ROLL DIAMETER: 6" x 18-1/2" FACE (160 MM x 470 MM)
BACK UP ROLLS: 16" x 18-1/2" FACE (406 MM x 470 MM)

BEARING WORK ROLL/BACK UPS: TIMKEN TAPER ROLL
FACILITY: 4 ROLL BENDING CYLINDERS

MAIN MOTOR: 250 HP 0/1000/15000 RPM
COILER MOTOR: 45 HP 0/720/1500 RPM
MANUFACTURER: ASEA
MAX. STRIP SPEED: 0/400/600 FT./MIN. (0/122/182 M/MIN.)
MAX. TENSION: 2400 LBS.

THICKNESS RANGE: MAXIMUM 0.138" (3.5 MM)
MINIMUM 0.004" (0.1 MM)

MAX. COIL WEIGHT AS USED: 1 TON
MAX. COIL O.D. : 33" (840 MM)
MATERIALS ROLLED: STAINLESS STEEL, COPPER, BRASS, BRONZE
RECOILER DRUMS: 12" DIA. x 18-1/2" FACE (300 MM x 470 MM)
OPERATION: CONCENTRIC HYDRAULIC DRUMS W/AUTO GRIPPER
AGC: VOLMER CONTROL SYSTEM

FULLY HYDRAULIC LOAD CAPSULE SYSTEM CONTROLLED BY MOOG VALVES AND WORK ROLL
TRANSDUCERS.

TWIN VOLMER GAUGES ON HYDRAULIC SLIDES

MULTI MATERIAL DECOILER: EXPANSION RANGE 9" - 22" (228 MM - 558 MM)
HYDRAULIC SNUBBER ROLL UNIT

FULL EMULSION COOLING/FILTRATION

CARRY-OVER TABLE WITH THREE (3) FLOOR MOUNTED COIL CARS

ELECTRICS: C & W SOLID STATE GANTRY MOUNTED
SPARES: TWO (2) NEW BACK UPS
FIVE (5) PAIRS OF WORK ROLLS

MACHINE IS STILL INSTALLED RUNNING AND IN EXCELLENT CONDITION.