19F LEWIS TRAVEL CUT SHAPE STRAIGHTENING AND CUTTING MACHINE (4806)

MANUFACTURER: THE LEWIS MACHINE CO

MODEL: 19F LEWIS TRAVEL-CUT SHAPE STRAIGHTENING AND
CUTTING MACHINE

CAPACITY: 3/16" (4.8MM) TO 1/2" (12.7MM) SQUARE OR
EQUIVALENT AREA IN FLATS AND HEXAGON. MAXIMUM
WIDTH OF FLATS 1" (25.4MM) WIDE.

FEED RANGE: THREE SPEED FEED AND THREE SPEED FLYWHEEL
TRANSMISSION. FEED SPEEDS 75, 100, AND 125 FPM.
FLYWHEEL SPEEDS 90, 125, AND 150 RPM.
STRAIGHTENING UNITS:
VERTICAL: CONSISTS OF 2 VERTICAL FEED ROLL SHAFTS AND EIGHT
VERTICAL STRAIGHTENING ROLL SHAFTS. ALL SHAFTS
ARE DRIVEN WITH THE FRONT 5 ADJUSTABLE TO APPLY
PRESSURE TO THE STOCK. THE ENTIRE HOUSING IS
ADJUSTABLE TO HOLD THE STOCK ON CENTER LINE.

HORIZONTAL: CONSISTS OF 8 HORIZONTAL STRAIGHTENING ROLL
SHAFTS AND 2 HORIZONTAL FEED ROLL SHAFTS. ALL
SHAFTS ARE DRIVEN WITH THE UPPER 5 ADJUSTABLE TO
APPLY PRESSURE ON THE STOCK.

CUT OFF MECHANISM: CRANK ACTUATED TRAVELING HEAD WITH CAM CUT-OFF.

MACHINE DRIVE: 25 HP

WEIGHT (APPROXIMATE): 12,500 POUNDS

*******************MACHINE NOT EQUIPPED WITH RUN OUT TABLE*******************