50" X 6" WEAN SLITTING LINE (3219)

MANUFACTURER WEAN

SLITTER
ARBOR SIZE: 50" X 6"
ARBOR ADJUSTMENT: PARALLEL
KNIFE OD: 12"
SLITTER DRIVE MOTOR: 7.5 HP, AC, 460 VOLTS, 10.4 AMPS
1500 RPM GEAR HEAD MOTOR, CENTURY
SERIAL # 59486-1, GEAR RATIO 86.5,
OUTPUT RPM 16.5, MODEL 335A-254
WEAN ORDER # 7830 (ARRG DWG # GS1854.GS1164)
SERIAL # 7825-35
ENTRY PINCH ROLLS: 5" X 52"
PINCH ROLL ADJUSTMENT: HAND LEVER

PREVIOUS USE (STEEL)
THICKNESS GAUGE .005" - .125"
COIL WEIGHTS 15,000 LBS.
TWO SPEED RANGE LOW RANGE 90 - 225 FPM
HIGH RANGE 200 - 500 FPM
COIL SIZE 16/20" I.D. X 50" O.D.

UNCOILER
MANDREL SIZE: 14"/18" X 51"
MANDREL SIZE WITH FILLER: 22"/24" X 51"
MANDREL EXPANSION: HYDRAULIC
BACK TENSION: FRICTION BRAKE
HYDRAULIC PUMP MOTOR: 5 HP, 220/440 VOLTS, 14.8/7.4 AMPS
1150 RPM

RECOILER
MANDREL SIZE: 20" X 51"
MANDREL GRIPPER: MANUAL
MANDREL EXPANSION: MANUAL
RECOILER DRIVE MOTOR: 50 HP, 1750 RPM, 500 VOLTS, DC,
83 AMPS, FLD VOLTS 300, FLD AMPS
2.25, TYPE N, DUTY CONT., WINDING
SHUNT, MODEL 3280B452005, WER ELEC.,
EQUIPPED WITH SCR DRIVE UNIT
1ST REDUCER: HORSBURGH & SCOTT, SIZE 8"-W38
HERRINGBONE SPEED REDUCER, RATIO
2 - 4.57, 2 SPEED, SERIAL# F2058
2ND REDUCER: HORSBURGH & SCOTT, HELLICAL SPEED
REDUCER, SIZE LD-3200L, RATIO 20.L
SERVICE FACTOR 102 HP, INPUT RPM
1150, SERIAL# F2055
OVERARM SEPARATOR: 2-1/2" X 50"
COIL PUSH OFF: HYDRAULIC

SCRAP BALLER
SCRAP BALLER DRIVE MOTOR: 15 HP, 1755 RPM, 440 VOLTS,
22 AMPS

(2) COIL CARS
TYPE: SELF CONTAINED, ABOVE GROUND
EQUIPPED WITH ABOVE GROUND COIL CARS, AND TOOLING