Equipment
Slitters
SLITTING LINES
12" (304mm) RUESCH MODEL 76 SLITTING LINE (12673)

12" (304mm) RUESCH MODEL 76 SLITTING LINE (12673)

SLITTING LINES

12" (304mm) RUESCH MODEL 76 SLITTING LINE (12673)

SLITTING LINES
+1 203-484-0400

Overview

Type:
SLITTING LINES
Manufacturer:
RUESCH
Model:
76
Stock #:
12673
Status:
For Sale

Used 1961 Ruesch Model 76 Slitting Line available for purchase. Engineered to work with Beryllium Copper, High Carbon, and Stainless Steel, this machine offers a width capacity of 2" to 12". Arbor size is 14". Machine includes a slitter head, cutter, and two recoilers. Designed for a slitting speed of 0-250 FPM and can accomodate 15 cuts in .020" thick material. Runs with a 7 1/2 HP drive motor. Note: Payoff to be provided by the purchaser. Avoid delay, secure now.

Capacity12"

MACHINE# 12673

SLITTING LINE:
MANUFACTURER: RUESCH MACHINE CO
MODEL NUMBER: 76
SERIAL NUMBER: N1966 5309
TYPE SLITTER: PULL THROUGH FINGER SET UP
ARBOR SIZE: 14" (355mm) x 2 1/2" (63.5mm) DIAMETER
DIRECTION: RIGHT TO LEFT

MATERIAL:
TYPE: BERYLLIUM COPPER, HIGH CARBON AND STAINLESS STEEL
WIDTH: 2" TO 12" (50mm - 305mm)
THICKNESS:
- PER ORIGINAL SPECS: .001" TO .020" (.025mm - 0.508mm)
- AS USED: .003" TO .025" (.076mm - 0.635mm)

COIL SIZE:
MINIMUM I.D.: 6" (152mm)
MAXIMUM O.D.: 16" (406mm) APPROX.
MAXIMUM COIL WEIGHT:
- PER ORIGINAL SPECS: 600 LBS. (270 KG)
- AS USED: 1000 LBS. (450 KG)

PAYOFF TO BE SUPPLIED BY THE PURCHASER.

SLITTER HEAD:
ARBOR SIZE: 2 1/2" (63.5mm) DIA. x 14" (355mm) WIDTH

SLITTER:
CUTTER DIAMETER: 5 1/2" (140mm)
SPACER DIAMETER: 3 3/4" (94mm)
ARBOR DIAMETER: 2 1/2" (63mm)
SLITTING SPEED: 0 - 250 FPM (0 - 76m/min.)
NUMBER OF CUTS: 15 IN .020" (.050mm) THICK MATERIAL @ 250 FPM (76m/min.)
MAXIMUM STOCK WIDTH: 12" (305mm)
FLOOR TO TIP OF CUTTERS: 38" (965mm) APPROX.
ENTRY SIDE GUIDES: MANUAL ADJUSTMENT
SLITTER HOUSING: RUESCH 76-93A
DUAL HANDWHEEL ADJUST
WOODEN FINGERS
FINGER STABILIZER: SCREW TYPE
DIGITAL COUNTER: RED LION
DRIVE MOTOR: 7 1/2 HP, 1745 RPM, 440 V, 3 PH, 60 HZ, VARIABLE SPEED
w/EATON DYNAMATIC ADJUSTOSPEED DRIVE
EXIT PINCH ROLLS: 2" (50mm) DIA. x 13" (330mm) WIDTH
MANUFACTURER: RUESCH MACHINE CO.
MODEL No.: 104 A

SCRAP WINDER:
DRUM DIAMETER: 5 1/2" (140mm)
DRUM WIDTH: 14 1/2" (368mm)
DRIVEN FROM MAIN DRIVER

RECOILERS:
QUANTITY: 2
SHAFT DIAMETER: 2 7/8" (71.12mm)
SHAFT WIDTH: 16" (406mm)
CHAIN DRIVEN FROM MAIN DRIVE
USES SEPARATOR DISKS
APPROX. WEIGHT OF MACHINE: 2,200 LBS. (1000 KG)

LARGE QUANTITY OF TOOLING AVAILABLE

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**