22" (558mm) x 33" (838mm) 2-HI UNITED TEMPER PASS MILL (13353)

MACHINE# 13353

1. TECHNICAL SPECIFICATIONS:
NEW PLC SYSTEM
NEW THYRISTOR POWER CONTROL UNIT FOR PAY OFF REEL DC MOTOR
NEW THYRISTOR POWER CONTROL UNIT FOR MILL DC MOTOR
MATERIAL: MILD STEEL STRIP UP TO 1/4 HARD (ROCKWELL B69)
FINISHING THICKNESS: 0.065" (1.65mm) TO 0.010" 0.254mm)
COIL DIA.: MAXIMUM 60" (1524mm), MINIMUM 32" (812mm)
COIL WIDTH: MAXIMUM 25" (635mm), MINIMUM 16" (406mm)
COIL WEIGHT: 1500 LBS. (680 KG)
MILL SPEED 22" (598mm) DIA. ROLL: 757/1,514 FPM (230/461M/MIN.)
WORK ROLL: 22" (598mm) DIA. MAXIMUM 8' 6-7/8" (2621mm) OVERALL LENGTH

2.PAY OFF REEL
DC MOTOR: 100HP 350/1,200RPM 250VDC/300AMPS
GEAR RATIO: 4.33/1
DRUM: HYDRAULIC COLLAPSE 23" (584mm) MAXIMUM DIA., 19" (482mm) MINIMUM DIA.
COIL CHARGING CAR: HYDRAULIC LIFTER CYLINDER 7" (178mm) BORE 15" (381mm)
STROKE 750# WORKING PRESSURE
HYDRAULIC CARRIAGE CYLINDER 5" (127mm) BORE 4' 3" (1220mm) STROKE
STRIPPER: CYLINDER 3" (76mm) BORE 26 1/2" (673mm) STROKE 750# WORKING PRESSURE

3.MILL
DC MOTOR: 300HP 400/800RPM 250VDC/970AMPS
GEAR RATIO:
ROLL SCREW DOWN: HYDRAULIC CYLINDER 16" BORE 3 7/8" STROKE 6000 PSI x 2 SET,
MOOG VALVE PID POSITION CONTROL, HYDRAULIC PUMP PF4015-1593 DYHEX/RIVRTT

4.TENSION REEL
DC MOTOR: 200HP 350/1200RPM 230VDC/710AMPS
GEAR RATIO: 4.32/1
COIL DISCHARGING CAR: LIFTER CYLINDER 7" BORE 19 3/4" STROKE 750# WORKING
PRESSURE
COIL CAR CARRIAGE CYLINDER: 5" BORE 6' STROKE 750# WORKING PRESSURE.
COIL STRIPPER: 3" BORE 26 1/2" STROKE 750# WORKING PRESSURE

5.ENTRY AND EXIT DEFLECTOR ROLL: 8" (203mm) DIA. 30" (762mm) FACE

6.ENTRY AND EXIT HYDRAULIC SYSTEM
TANK CAPACITY: 500 GALLON
VICKERS PUMP: MODEL V-144-10, 33.5G.P.M. @ 1000#/?"
MOTOR: 25HP 1200RPM x 2 SET

7.ROLL BALANCE HYDRAULIC SYSTEM
TANK CAPACITY: 30 GALLON
BALANCE CYLINDER: 2" (51mm) DIA.
OPERATOR AT APPROX 1200 PSI
MOTOR: 5HP AC440V 1200RPM

8.GEAR LUBRICATION SYSTEM
TANK CAPACITY: 700 GALLON
PUMP: 15G.P.M. @ 60 PSI x 2 SET
MOTOR: 1 1/2HP AC440V 1200RPM x 2 SET

9.MORG OIL LUBRICATION
TANK CAPACITY: 700 GALLON
PUMP MOTOR: 1.5KW AC440V 1145RPM x 2 SET

10.WORK ROLL POLISHING DEVICE

11.MCC CONTROL PANEL

12.PLC PANEL: MELSEC PLC (JAPAN)

13.DC MOTOR THYRISTOR CONTROL PANEL
PAY OFF REEL: EUROTHERM 590P/0380/500 x 1 SET
MILL: EUROTHERM 590P/830/500 x 1 SET
TENSION REEL: GENERAL ELECTRIC x 1 SET

14.OPERATION CONTROL PANEL x 1 SET

15.LAYOUT

16.SPARE PARTS
SCREW DOWN HYDRAULIC PUMP PF4015-1593 x 1 EA.
GEAR PUMP 80BV x 1 EA.
METAL BEARING DIA. 420 x L 400 x 1 EA.
WINDER DRIVE GEAR DIA. 900 x 8260 B x 1 EA.
WINDER PINION GEAR DIA. 300 x L 1000 x 1 EA.

** SPECIFICATIONS SUBJECT TO REVISIONS **

** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **