2" (48.4mm) - 3/4" (19mm) STEEL TUBE MILL WITH TURKSHEAD (13777)

MACHINE #13777

SPECIFICATIONS:

MANUFACTURER : Not Identified

RAW MATERIALS :

Strip material : hot rolled strip steel

Grades : Ts 520 MPa Ys 340 MPa

Width : 75mm to 150mm (3" - 11.8")

Thickness : 1,2mm to 2,0mm (.050" - .078")

Coil ID : 480mm to 520mm (18.9" - 20.5")

Coil OD : 800mm to 1800mm (31.5" - 70.8")

Max. coil weight : 3 ton

FINISHED PRODUCT :

Pipe OD : Max. 48,4mm (1.9") Min. 19mm (0.75")

Thickness : 1,2mm to 2,0mm (.050" - .078")

Length : 4 m to 8 m (13.26 ft.)

Accuracy : + 1,5mm (.060")

Line speed : 15 m to 50 m/min (50 - 165 FPM)

UNCOILER :

Strip width : 75mm to 150mm (3" - 6")

Coil OD : 800mm to 1800mm (31.5" - 70")

Coil weight : 3 ton

Double cone head:

Brake : pneumatic

HORIZONTAL SPIRAL ACCUMULATOR

Max. capacity : 200 m to 300 m (656 - 984 ft.)

Max. feeding speed : 100 m/min (328 FPM)

FORMING MILL :

Breakdown passes : 4

Fin passes : 3

Horizontal shaft dia. : 70mm (2.76")

Drive motor : 85 KW

WELDING STAND :

2 roll type

SOLID STATE HF WELDER :

Make : Baogang ( China )

KW : 200

Complete with :
Rectifier cabinet
Inverter cabinet ( incl. set air conditioner )
Water cooling system
Transformer
Console
3 D adjustable bracket

WATER COOLING DEVICE :

Cooling tunnel - 3 m (9.8 ft.) long

SIZING MILL

Horizontal stands ( driven ) : 4

Idlers : 4

Diameter driven shafts : 70mm (2.76")

Drive motor :

TURKSHEADS ;

Type : 4 roll

No :

FLYING CUT OFF SAW :

Make : ITL ( India )

Type : cold saw ( min burr )

Consisting of : cutting saw - machine base - drive device - speed measuring
device - water cooling.

Cut length : 4 m - 8 m (13 - 26 ft.)

Accuracy : + 1,5mm (.060")

Max. speed :

Pipe clamping mode : pneumatic

RUN OUT TABLE & TURN OVER DEVICE

** CATALOG SPECIFICATIONS NOT VERIFIED BY SELLER **

** SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER **

** SPECIFICATIONS SUBJECT TO REVISIONS **

** PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE **