10" (254mm) SLITTING LINE w/DUAL TAKE-UPS (12674)
SLITTING LINES
Discover the power of efficiency with this used 10" Slitting Line, complete with dual take-ups. Crafted by Industrial Steel Custom, this model offers a thickness range between 0.005" and 0.062", handling anywhere from 6 to 9 cuts. Proudly featuring a 15 HP motor powering both winders and the slitter head, its manual entries and wooden fingers offer you precise control over your craft. Its overall length is 11.3 feet plus payoff, including an array of tooling. A perfect addition to enhance your productivity.
| Capacity | 10" |
MACHINE# 12674
MANUFACTURER: NATIONAL STANDARD CORP.
TYPE SLITTER: PULL THRU SLITTING LINE WITH DUAL TAKE-UPS
ARBOR SIZE: 10" (254mm) WIDE x 2 1/2" (63.5mm) DIAMETER
CAPACITY:
THICKNESS RANGE: 0.005" (.127mm) - 0.062" (1.6mm)
NUMBER OF CUTS:
9 CUTS 0.005" (.127mm)
6 CUTS .062" (1.6mm)
DIRECTION OF TRAVEL: LEFT TO RIGHT
PAYOFF:
TYPE: NON-DRIVEN EXPANDING MANDREL
MANDREL DIAMETER: 12" (305mm) DIA. x 12" (305mm) FACE
TYPE EXPANSION: MANUAL
CENTERLINE HEIGHT: 36" (915mm)
BRAKE FOR BACK TENSION: MANUAL
MAXIMUM COIL O.D.: 36" (915mm)
SLITTER HEAD:
DRIVE: DRIVEN FROM MOTOR ON RECOILER
ARBOR SIZE: 2 1/2" (63.5mm) DIA. x 10" (254mm) FACE
ENTRY SIDE GUIDES: MANUAL
VERTICAL ARBOR ADJUSTMENT: MANUAL
KNIFE SEPARATION: WOODEN FINGERS
EXIT PINCH ROLLS: 3 1/4" (95mm) DIA. x 12 1/2" (317mm) FACE
STRIP COUNTER: DURANT MODEL 5-H-1-R-CL, S/N 262
KNIFE O.D.: 5 1/2" (140mm)
SPACER O.D.: 3 3/4" (95mm)
TAKE-UPS:
WINDER No. 1:
6 1/2" (165mm) DIA. x 14" (355mm) FACE WIDTH x 16" (406mm) MAX. O.D.
WINDER No. 2:
2 3/4" (70mm) SHAFT DIA. x 13" (330mm) FACE
WINDERS USE SEPARATOR DISCS
DRIVE MOTOR:
POWERS BOTH WINDERS AND THIS SLITTER HEAD
CAPACITY: 15 HP, 44/22 AMPS, 1760 RPM, 230/460 VOLTS
REEVES VARIABLE SPEED DRIVE
MODEL No.: MOTODRUM
SIZE: 8441
IDENT. No.:
R356784-00-PQ
079189-1/2-FE
BELT: 605036-29-K
RATIO: 2.8 TO 1
OUTPUT RPM: 182-1430 RPM
OVERALL LENGTH OF SLITTING LINE: 11.3 FT. (3.44m) PLUS PAYOFF
INCLUDES LARGE QUANTITY OF TOOLING
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
